NJFBOA - Home of New Jersey's Camaros and Firebirds

NJFBOA - Home of New Jersey's Camaros and Firebirds (http://www.njfboa.org/forums/index.php)
-   Transmission and Driveline (http://www.njfboa.org/forums/forumdisplay.php?f=38)
-   -   new rear end? (http://www.njfboa.org/forums/showthread.php?t=29889)

camaro2you 11-11-2007 10:19 AM

I have a clunk in the rear of car when i go over bumps and i have checked everything possible, could it be the u joints?

JSPERFORMANCE 11-12-2007 07:02 AM

Not likely, they usually make noise when you go in and out of gear. Clunking over speed bumps soundls like something else could be bad.

DrivenZ28 02-02-2008 04:36 PM

Quote:

Originally Posted by camaro2you (Post 394514)
I have a clunk in the rear of car when i go over bumps and i have checked everything possible, could it be the u joints?

I had a similar problem, it turned out to be my rear lower control arm bushings...they were trashed. I got some new tubular control arms with poly bushings and the car rides like a dream now...no noise.:nod:

camaro2you 02-02-2008 06:06 PM

Quote:

Originally Posted by DrivenZ28 (Post 416470)
I had a similar problem, it turned out to be my rear lower control arm bushings...they were trashed. I got some new tubular control arms with poly bushings and the car rides like a dream now...no noise.:nod:

Actually turned out to be the drivers side caliper bracket worked itself loose, the locktite must not of grabbed enough threads.

DrivenZ28 02-02-2008 06:22 PM

Quote:

Originally Posted by camaro2you (Post 416490)
Actually turned out to be the drivers side caliper bracket worked itself loose, the locktite must not of grabbed enough threads.


Ah yes, that will do it...glad to hear you figured it out! Mine haunted me for months before I finally did something about it.

qwikz28 04-04-2008 12:19 AM

i'm bumping this up because i feel like i would like to buy this unit. after contemplating my options, i realize that i'm just not happy with the 12 bolt. the idea of a lighter rear makes sense.

i don't intend on drag racing much or very hard if i do so i believe i should be fine with an aluminum center section. and people are saying this rear is quiet which is one of my primary concerns. is there anything else i should look for or should i bite the bullet and buy the rear?

bad64chevelle 04-04-2008 08:26 PM

Did you try to fix your 12bolt at all?

JSPERFORMANCE 04-05-2008 08:47 AM

Did you forget what I told you? The aluminum center section is really only for lightweight purpose built race cars. With a iron center section the weight savings are minimal if any at all. The m9 uses its own torque arm assembly and does not use any of the stock arm geometry. Also there are no provisions to run the stock rear sway bar. You already have a 12 bolt, the problems you are having are most likely a gear issue, which can happen to any style rear differential. Do what you want but you will definately be spending alot more money and alot more agg going to the M9 rather than repairing the 12 bolt you already own.

qwikz28 04-05-2008 09:55 AM

no, i didn't try repairing the 12 bolt yet. i just have a bad feeling about this rear for some reason. it needs a lot of work cause there is alot of different noises coming from my undercarriage.

thanks josh, i was hoping i could get away with the aluminum but it would be wise to trust your experience. i hope your up for the task cause i'm dropping my car off as soon as my GF finishes her lab in two weeks. :rock:

ps- josh, a little off topic but do you do exhausts? for example if i wanted a muffler welded in?

JSPERFORMANCE 04-05-2008 10:00 AM

Yes I can weld a muffler in for as well. Just let me know when you want to drop it off..

qwikz28 04-05-2008 10:22 AM

Quote:

Originally Posted by JSPERFORMANCE (Post 434775)
Yes I can weld a muffler in for as well. Just let me know when you want to drop it off..

i'll let you know when i know for sure. i've been trying to drop it off since last year, its just one thing after the other though...


All times are GMT -5. The time now is 03:03 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.