NJFBOA - Home of New Jersey's Camaros and Firebirds

Page 2 of 2

Show 25 post(s) from this thread on one page

NJFBOA - Home of New Jersey's Camaros and Firebirds (http://www.njfboa.org/forums/index.php)

- Engine / Power / Tuning (http://www.njfboa.org/forums/forumdisplay.php?f=31)

- - Lt4 swap? (http://www.njfboa.org/forums/showthread.php?t=61442)

sweetbmxrider

10-05-2012 07:09 AM

Quote:

Originally Posted by Featherburner (Post 853968)

Not a 92, the fuel lines are on the wrong side for a 92.

Google images tells me the 92 vette fuel rail exits high out the passenger side. And now I know!

Quote:

Originally Posted by transmaro93 (Post 853975)

yea i know if you swap all sensors and hardwear it will work i was just tryen to see if if knew that because hes making it sound like hes pulling his old motor and dropping this one in plug and play and if its not the same year then he will have issues..

Right on sir!

BLACKMAMBA

10-05-2012 02:10 PM

the motor was supposed to be out of a 94 trans am...my car is a 96 z28. as long as i use my sensors it should be pretty straight forward?

zraffz

10-05-2012 02:56 PM

Quote:

Originally Posted by Lt1_8U (Post 853957)

I put a 92 vette lt1 in my trans am and it fit(using the corvette pan)

Really? We had to switch pans lol

Lt1_8U

10-05-2012 03:53 PM

That's weird I directly swapped it all over. I used different engine mounts so maybe it made the difference

grazi

10-05-2012 06:33 PM

So what year trans am is this motor from again? Mines a 94 and the fuel lines do not wrap around and sit where they are. Mine come off the back of the fuel rail directly into the fuel pressure regulator and stub out right above/behind driver side valver cover.

LTb1ow

10-05-2012 06:47 PM

1993, hence featherburner being all excited :lol:

grazi

10-05-2012 06:59 PM

INteresting, never knew that. And i see the 93 doesnt have the crossover tube on front of the fuel rail, too..

LTb1ow

10-05-2012 07:05 PM

And now you understand the silliness of 93s

Featherburner

10-05-2012 10:08 PM

Quote:

Originally Posted by LTb1ow (Post 854111)

And now you understand the awesomeness of 93s

fixed that up for you!:wink:

sweetbmxrider

10-06-2012 08:40 AM

Quote:

Originally Posted by BLACKMAMBA (Post 854063)

the motor was supposed to be out of a 94 trans am...my car is a 96 z28. as long as i use my sensors it should be pretty straight forward?

Like I said before, the timing cover and gear set, knock sensor, reluctor wheel, intake manifold, fuel rail and injectors, etc should all be switched. Technically the camshafts are different so you should swap them too but the motor should still run fine if you don't.

All times are GMT -5. The time now is 02:29 AM.

Page 2 of 2

Show 25 post(s) from this thread on one page