![]()  | 
	
		
 Bolt needed 
		
		
		I figured I would stick this in the lounge cause its not really a tech question.  
	Aside from purchasing online, where would I be able to find this, 20mm x 1.5?  | 
		
 any hardware store? 
	 | 
		
 IDK, most guys can't find em at local shops. I guess I can add it to the shopping list tmmr. 
	 | 
		
 There are a couple of local bolt and nut speciality places by me that I use. What is this for?, do you need a specific grade?, cause a hardware store may have the standard grade 5 but you may want to check out either fastenal or Central Jersey screw and bolts. 
	 | 
		
 LOL, not sure if I wanna say what its for....  
	But def not needing anything substantial. Its just needed as a plug. And its for an LT1... if you can guess, well, idk.  | 
		
 Oh, I got mine at pepboys back when I needed those (if I am guessing correctly). That size is right in the help section I believe. Napa also stocks those. 
	 | 
		
 Nope, only need one.  
	And it needs an oring or RTV to seal well. I will see what the local stores have to offer.  | 
		
 cut it off and weld a plate over that tumor 
	 | 
		
 Yea?  
	You going to weld it nice and oil tight for me?  | 
		
 oil tight? nvm.... 
	 | 
		
 Go to Fastenal if you have by you.  
	http://www.fastenal.com/web/location...0Ma3uQc38Lc390 They should have it.  | 
		
 Oh sweet!  
	There is one on the way to Autozone! Thanks!  | 
		
 What the hell is that for? DId you go and get the LS conversion for your car? :evil: 
	 | 
		
 yeah, what is it? 
	 | 
		
  | 
		
 Low oil sensor delete. 
	 | 
		
 Quote: 
	
  | 
		
 Quote: 
	
  | 
		
 thats not thinkin with your dipstick jimmy 
	 | 
		
 Quote: 
	
  | 
		
 Quote: 
	
  | 
		
 Yea, Fastenel did not have it in stock, and I wanted to change my oil today. So I pulled out the sensor, unplugged the harness, filled it with RTV and screwed it back in. We shall see.  
	And the other weird thing, I got a new oil drain gasket and its just a nylon washer now, weird right?  | 
		
 yeah drain plug gaskets usually are just a nylon washer...some are paperish 
	 | 
		
 Well the old one was like a metal ring with a rubber washer inside. I dunno, I looked at the nylon ones and was thinking they will never seal. 
	 | 
		
 http://img.photobucket.com/albums/v3...mos/310814.png 
	Quote: 
	
  | 
| All times are GMT -5. The time now is 10:35 PM. | 
	Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.