NJFBOA - Home of New Jersey's Camaros and Firebirds - Recommended Places for PROM + Flexplate

NJFBOA - Home of New Jersey's Camaros and Firebirds (http://www.njfboa.org/forums/index.php)

- Engine / Power / Tuning (http://www.njfboa.org/forums/forumdisplay.php?f=31)

- - Recommended Places for PROM + Flexplate (http://www.njfboa.org/forums/showthread.php?t=13079)

Recommended Places for PROM + Flexplate

Any good places in the north jersey area that'll do PROM tuning and a flexplate? 2 places will work, but I'm really pushing to have fun with this car before God flakes his dandruff all across new jersey :-/

i can do a flexplate, but i have no OBDII tuning equipment.

talk to bill (foff667) about tuning. the flywheel is a pretty easy job, if I wasnt so far away, I'd offer to do it too but I'll let pat get some experience under his belt :wink:

OBDII?! he's talkign about a PROM... this is for a 3rd gen formula...

Quote:

Originally Posted by Savage_Messiah

OBDII?! he's talkign about a PROM... this is for a 3rd gen formula...

he said "with this car", i'm assuming he means the LS1.

if it's for the Formula, I'd be happy to do tuning as well.

Quote:

Originally Posted by skorpion317

Quote:

Originally Posted by Savage_Messiah

OBDII?! he's talkign about a PROM... this is for a 3rd gen formula...

he said "with this car", i'm assuming he means the LS1.

if it's for the Formula, I'd be happy to do tuning as well.

K I assumed you knew it was my formula. In my sig, states my LS1 as a daily driver :-P I sent you a PM. Thanks

The Formula's VIN # for reference is:
1G2FS21E5JL217784

The engine is out of an 87 Formula with an LB9 (5.0L 305 TPI) with a 700r4 and the POSI gears are still unknown ATM

MEMCAL
-------------28-Pin Chip (Left)

Code:

The Silver Sticker Reads:

DELCO 

ABUS

8534



Engravement in Yellow Writing on the Chip Reads:

DELCO

69300

D 5012A

L636377SX

-------------14-Pin Chip (Middle)

Code:

16055375

[2] 8647

-------------16-Pin Chip (Right)

Code:

16055376

[2] 8645

-------------The Brown Casing of MemCal With White Numbers on the Side

Code:

35006 8644

Yellow Buffer

Code:

0576

4OUT.BUFFER

25071437

(This might help, maybe this is the reason why new VSS isnt registering thus my speedo not working??)

ECM
-------------Barcode Sticker

Code:

16059521    AUM

||||||||||||||||||||||||

869521M610247458

-------------Service Sticker

Code:

DELCO Electronics 

Service Number: 1227165

FACTORY AUTHORIZED REMANUFACTURED MODULE

For Delco Electronics Corporation

MAY BE ELIGIBLE FOR CORE RETURN

LABEL NO. 16087373

-------------Engraving Inside the Module Casing

Code:

16047243

-------------Sticker on the side of the casing

Code:

3072831

Any more questions lemme know.... other than that, thats all the #'s i can find on the module. If someone in the area knows how to count teeth (ON THE GEARS) and wants to give me a hand doing so, that'll be greatly appreciated ;-)

ill give you a hand, but you either need to come out my way or wait till after oct 7

Nice... now i dont have to jack the car up, yeah... just walk under there and count the teeth please :lol:

:j/k: Well without me knowing what the gears are, i cant get it tuned, maybe someone in the area can give me a hand. Thanks for the offer tho :-P

i can do it, i might as well while i have the trans unbolted to put the flexplate in. once i find out the number of teeth, it shouldn't be too hard from there.