Mixed bag of 1st gen, 4th gen stuff for sale
 

Funds got a little tight all of the sudden so I could use a little extra cash. Feel free to make an offer on anything listed and I can get some pictures as long as my camera hangs in there.

-LS1 power steering reservoir(brand new GM) $25
-94-96 Impala SS/Caprice power steering hose(brand new GM) $70
-GM 24 lb injectors for LT1(used but a great upgrade for 93's) $60
-K&N 3" tall air filter for old 4 bbl setups(new) $30
-Holley chrome air cleaner for 4 bbl(used but nice) $15
-Pro-form chrome air cleaner for 4 bbl(new) $25
-chrome thermostat housing older style small block(used) $10
-67-69 Camaro chrome radiator support bars(used) $15
-TH350 tranmission with torque converter(sitting for years so needs a rebuild or seals most likely) $100
-67-69 Camaro small block fan shroud(small chip out of corner)$25
-Catco 2-1/2" catalytic converter(new) $40
-Hidden hitch trailer hitch for 4th gen F-body with draw bar $75
-Stock 96 SS exhaust manifolds(might be extrude honed) $50
-Stock 96 SS dual cat y-pipe(had approx 1" cut off end) $50
-4th gen new charcoal cannister for EVAP system(AC Delco) $40
-Palm M100 handheld with OBDII connector and software to scan engine while running and read/erase SES codes(OBDII only) $125
-Mastercraft 275/40/17 tire with lots of tread $75
- GM style weatherpack 4 wire connectors(4 male, 4 female) and crimping tool(these don't connect to GM connectors but you can make your own harnesses with them) $60

Send me an email or PM for more details.

any pics of the scanner?

http://home.comcast.net/~jeffhansbur...roSS/Palm2.jpg

http://home.comcast.net/~jeffhansbur...roSS/Palm1.jpg

ill talk to my dad and see if he wants to take it off ur hands i should know by tomorrow night.

If camaro2you doesn't go for the scanner i would be interested in it....

Whoever comes up with the cash first is welcome to it.

Jeff, are you selling any other first gen stuff?

The only extra 1st gen stuff that I know I have is the grill stiffener for the upper part of the 69 grill. I don't know what else is going to be left over until my car is done.

Jeff,im looking for 68 Z/28 stuff,lmk if you have anything or know who might be selling a cowl plenum setup for a 68Z with the air pump indentation in front. Its a non RS car.also looking for a dated air pump setup with the exhaust manifolds and all the pipeing and hoses.whew!

I still have all this stuff for sale and could use some cash.

sorry for the long delay on getting back still got the scanner or no?

Yes, I still have the Palm scanner setup.