NJFBOA - Home of New Jersey's Camaros and Firebirds

NJFBOA - Home of New Jersey's Camaros and Firebirds (http://www.njfboa.org/forums/index.php)
-   Brake, Chassis and Suspension Tech (http://www.njfboa.org/forums/forumdisplay.php?f=28)
-   -   Steering line fitting (http://www.njfboa.org/forums/showthread.php?t=18543)

camaro2you 06-21-2006 01:33 PM

Steering line fitting
 
Hey do any of you guys know what size fitting is on the pressure side of the power steering that goes into the back of the pump i need the size that would be on a pump for a 72z28 camaro. thats the only pump i could find to work with my pulley setup but my 86 line fitting does not go in the back so i have to make a custom setup for a 72 fitting at one end and a 86 steering box fitting at the other any help will be greatly appreciated. Also if anyone has a keyway pulley that they are looking to get rid of let me know. thanks in advance

BonzoHansen 06-21-2006 02:23 PM

I really should know the answer, but I do not. Search at www.nastyz28.com

I think a 78-81 pump is the same physically, but with the same hose connections as the 3rd gens.

V 06-21-2006 04:17 PM

I am almost positive that on the 3rd gen, the fitting is the same as the tpi fuel rail fittings, which are available from Accel and Earls with 6-AN on the other end. but im not sure of thread size as of right now


All times are GMT -5. The time now is 09:47 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.