NJFBOA - Home of New Jersey's Camaros and Firebirds

NJFBOA - Home of New Jersey's Camaros and Firebirds (http://www.njfboa.org/forums/index.php)
-   Engine / Power / Tuning (http://www.njfboa.org/forums/forumdisplay.php?f=31)
-   -   question (http://www.njfboa.org/forums/showthread.php?t=22353)

WayFast84 12-23-2006 05:00 PM

question
 
When I swap my motor in, will I need an 02 sensor? i dont want to have any computers but still be smog legal.

BobonaStick 12-23-2006 05:14 PM

No... you don't need an O2... As long as you can get the air/fuel settings just right along with the timing you can get it to pass emissions...

NJSPEEDER 12-23-2006 05:32 PM

when you have your exhaust done, it wouldn't be a bad idea to have an O2 bung welded in. you won't need it for emissions, but if you ever want to do any advanced A/F tuning to get the most out of the engine, a wideband would make things much much easier.

deadtrend1 12-23-2006 07:07 PM

Quote:

Originally Posted by NJSPEEDER (Post 297699)
when you have your exhaust done, it wouldn't be a bad idea to have an O2 bung welded in. you won't need it for emissions, but if you ever want to do any advanced A/F tuning to get the most out of the engine, a wideband would make things much much easier.

:werd:

Fast92RS 12-23-2006 07:18 PM

:werddance:

WayFast84 12-23-2006 10:58 PM

my exaust plan is eventually hedman long tubes, dual 3 inch cut outs, y pipe, high flow cat, and a banks muffler

Tru2Chevy 12-27-2006 09:31 AM

Skip the hedman's and go straight for the hooker super comps.

- Justin

camaro2you 12-27-2006 12:14 PM

Quote:

Originally Posted by Tru2Chevy (Post 298575)
Skip the hedman's and go straight for the hooker super comps.

- Justin

:twisted:


All times are GMT -5. The time now is 07:23 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.