Koni SA'S
 

Hey guys I just got finished installing my Koni's I removed the rear isolator and put the fronts on the lower perch the car now sits 3/4" higher in the front should it be like this or did i do somthimg wrong i checked everything is seated correctly any help!!:|

you sayign front is higher than the rear, or the fronts are 3/4 inch higher than they were?

The front is 3/4" higher than the rear! The rear of the car sits and looks great, but the front is higher and makes it look like the rear of the car is dragging

i beleive your supposed to do the "hose mod" in the rear look it up on ls1tech ive seen it there before

Yes, thats what i did removed the isolator and installed 5/8 heater hose on the top, first set of coils!

the fronts have two mounts for the perch... mount it on the lower one

I dont understand. you changed shocks and you gained ride height? thats not supposed to happen. shocks dont support any weight, they just control the up and down movement.

.....

eh, maybe pics? i dont get it either. if its mounted correctly on the lower perch then the stance should be about 1/2-3/4 inch lower both front and back