Gasket help
 

I need help choosing gaskets for my 400sbc, I dont know what kind do use, and what bore or anything.

I need
head gaskets
intake
valve cover
and anything else for a cam change.

i have reusable header gaskets from my 305, would those work?

i have always been happy with fel pro products. you can see all the applications in jegs catalog, there may even be a kit available to suit your needs

fel-pro ftw. anything else, would be uncivalized....

Im basically looking for partnumbers thnx.

jsut look at the application charts for the block/heads/intake you are installing.

it is going to depend on what head you end up with, some you can drill easy for steam holes and some you cant the gasket falls apart or rips ???? what head did you or is that still up in the air as well -- anyway i have 17049 < maybe # been a while -- and can send one to you so as you end up putting the holes in the correct place, that is if you even end up with the 406 in the car -- jz

Chevy 400
Bore 4.200''
Thickness .039''
Volume 9.0cc


375-1034 Steel Wire Ring Head Gasket
Chevy 400
Bore 4.200''
Thickness .041''
Volume 9.3cc


I have no charts or anything, where can i find them?


the head will be vortecs, i have to much into this to return everything for it and get different heads

http://www.jegs.com/webapp/wcs/store...46662_-1_10205

gasket kits :)

doug herbert performance parts -- part # FEL - 1014 400 w/steam holes .039 33 dollars each --- FEL - 1044 w/steam .051 - 50 bucks each they also have them with out holes -- page 34 in new cat -- jz

they also have a complete kit -- i have no idea what is in it but it is fel pro and its # FELKS-2614 and its 50 bucks -- but i have never used it so i dont know what to tell you -- jz

do you also know if the bore is really 4.200" still, or is it maybe 4.230" or another variation after being bored.

if its not a boe ty block 4.20 its in the water jacket std is 4 .125 / 4.155 . and 4.185 is real shakey stock block u must sonic --

ah ok, i was just saying that since he said 4.200 and as far as i know, he never had the bore size checked. so it may be stock or it may have been bored, if the 4.200 will work on a stock bore then it doesnt matter. lol

I think what John was saying was that if i'ts a stock block, 4.200" bore gaskets would be very close to the water jacket.

I just used standard Felpro head gaskets for a 400 from the local Advanced Auto Parts store.

- Justin