NJFBOA - Home of New Jersey's Camaros and Firebirds

NJFBOA - Home of New Jersey's Camaros and Firebirds (http://www.njfboa.org/forums/index.php)
-   For Sale - Automotive Parts (http://www.njfboa.org/forums/forumdisplay.php?f=27)
-   -   Gauging intrest (http://www.njfboa.org/forums/showthread.php?t=24231)

WayFast84 03-13-2007 04:45 PM

Gauging intrest
 
Real corsa tips

and a refreshened 350 roller shortblock w/lt1 cam installed.

84HOtransam 03-13-2007 08:32 PM

interest in the 350 roller block- who built it? where is it from? how much?

WayFast84 03-13-2007 08:39 PM

Quote:

it a stock bore 93 engine. it was supposedly out of a police car. the guy put a new crank in it and bearings, reringed it and i bought the shortblock. i added vortec heads and performer rpm intake and i put in a roller cam out of a 95 lt1 in it. i would estimate it around 370 hp and atleast 9.75:1. could be closer to 10:1, but i don't know how to figure it out. it runs good on 87 octane. i don't experiance any pinging. i'm running a recurve kit in the dist. and the engine ran best with 33degrees total timing.
Id be intrested in the top end, and will sell the bottom end if its a good deal, other wise im just going to buy the whole motor and throw it in the car intill I have money to do what i want with the 400sbc.

84HOtransam 03-13-2007 08:44 PM

so is it a lt based engine or a gen 1 engine..sounds like its lt based in which case its no good for me

WayFast84 03-13-2007 08:48 PM

i dont think its an lt based engine..

http://i13.photobucket.com/albums/a2...4/100_0876.jpg

pick, remember just the short block is f/s

84HOtransam 03-13-2007 09:10 PM

yea how much are you looking to get..could i hear/see it run..

WayFast84 03-13-2007 09:19 PM

Quote:

Originally Posted by 84HOtransam (Post 323177)
yea how much are you looking to get..could i hear/see it run..

hows 400 sound? We can both go up together to here it run if yah want. Its in PA. I got a vid of it runing a 13.58

http://s100.photobucket.com/albums/m...whitetruck.flv

NJSPEEDER 03-13-2007 10:08 PM

is this a motor you have or something you are looking to get?
if you don't have it in your posession yet, i don't think it is a god idea to sell parts off of it.

GP99GT 03-14-2007 07:02 AM

if its a 93 motor out of a police car....its probably an LT1 block...that is, if caprices had lt1s then, which im starting to think they didnt

Knipps 03-14-2007 08:43 AM

Quote:

Originally Posted by GP99GT (Post 323290)
if its a 93 motor out of a police car....its probably an LT1 block...that is, if caprices had lt1s then, which im starting to think they didnt

think that was the 1st year
my 94 did.

Mike 03-14-2007 09:15 AM

that pic has a regular distributor......no opti..im no lt1 guy but dosent that tell ya somthing?

maroman88 03-14-2007 09:29 AM

they were TBI in 93, 94 was the 1st LT1 caprice/impala

z28c4maro82z 03-14-2007 12:07 PM

How much u looking for the tips. Don't have the money right now, but just to help u out

bubba428 03-14-2007 12:43 PM

and with the different distributor locations please fill me in on how an lt1 cam would work??? i'm thinking that might be why its a shortblock

Tru2Chevy 03-14-2007 12:59 PM

Quote:

Originally Posted by bubba428 (Post 323382)
and with the different distributor locations please fill me in on how an lt1 cam would work??? i'm thinking that might be why its a shortblock

LT1 cams still have a distributor gear on them. That's why several 305 guys use them for a cheap upgrade from the stock 3rd gen peanut cams.

- Justin

WayFast84 03-14-2007 02:21 PM

Quote:

Originally Posted by z28c4maro82z (Post 323361)
How much u looking for the tips. Don't have the money right now, but just to help u out

Ill give them to you for the price the guy is asking for them, if I dont have a 3 inch catback by then, wich is 50 bucks

WayFast84 03-14-2007 02:23 PM

Quote:

Originally Posted by NJSPEEDER (Post 323227)
is this a motor you have or something you are looking to get?
if you don't have it in your posession yet, i don't think it is a god idea to sell parts off of it.

I just needed some one to be intrested in getting the shortblock from me, before I went a head and got it.

NJSPEEDER 03-14-2007 02:57 PM

no selling parts you don't have. it isn't fair to let members count on you for parts that may or may not come through and may or may not be in a reasonable condition for their purposes.
part it out after you have everything in your posession.


All times are GMT -5. The time now is 06:19 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.