NJFBOA - Home of New Jersey's Camaros and Firebirds - Where can I get my steam holes/springs installed?

NJFBOA - Home of New Jersey's Camaros and Firebirds (http://www.njfboa.org/forums/index.php)

- Engine / Power / Tuning (http://www.njfboa.org/forums/forumdisplay.php?f=31)

- - Where can I get my steam holes/springs installed? (http://www.njfboa.org/forums/showthread.php?t=24598)

WayFast84

03-27-2007 07:13 PM

Where can I get my steam holes/springs installed?

I tried contacting a few people, and Im actually looking to have the heads machined for the springs(and springs installed), and the steam holes drilled, nothing else, Id like to stay in newjersey, But If I can get a killer deal, PA might be an option.

Who can I go to?

PLZ name and phone number, and anything else you would like me to know.

GP99GT

03-27-2007 07:53 PM

i have a drill and a bunch of drill bits....ill cut you a deal

hardline_42

03-27-2007 07:58 PM

Quote:

Originally Posted by GP99GT (Post 327622)

i have a drill and a bunch of drill bits....ill cut you a deal

Same here. I also have all the Comp Cams machining tools for doing the typical Vortec upgrades.

WayFast84

03-27-2007 08:21 PM

Quote:

Originally Posted by hardline_42 (Post 327623)

Same here. I also have all the Comp Cams machining tools for doing the typical Vortec upgrades.

But like I said, as a newb, I cant risk borrowing the tools to drill and machine the heads, and then have to get a new head for saving money..

hardline_42

03-27-2007 08:50 PM

Quote:

Originally Posted by WayFast84 (Post 327630)

But like I said, as a newb, I cant risk borrowing the tools to drill and machine the heads, and then have to get a new head for saving money..

OK. Try East Coast Pit Stop in Trenton
609-599-4593

unstable bob gable

03-27-2007 11:23 PM

Larry Hansen racing, ya mope! Right over in Middlesex, not far from ya at all. Super cool dude, tell 'em unstable bob gable with the AMX sent ya!
http://www.hansenracing.us/

WayFast84

04-09-2007 05:23 PM

Quote:

Originally Posted by unstable bob gable (Post 327710)

Larry Hansen racing, ya mope! Right over in Middlesex, not far from ya at all. Super cool dude, tell 'em unstable bob gable with the AMX sent ya!
http://www.hansenracing.us/

called them 4 days ago never got anything back

Ian	04-09-2007 11:04 PM

if you get the heads cut, I can install the springs for you.

WayFast84

04-13-2007 09:10 PM

Quote:

Originally Posted by Ian (Post 332276)

if you get the heads cut, I can install the springs for you.

maybe ill take you up on that, I talked to harcorez28, because its been over 2 weeks since i left a message to larry hansen, and he recomended me going to a napa, and im going to one tomorrow to chat about steam holes and etc

Ian	04-14-2007 12:19 AM

well, let me know if you need me to do that for ya. I've swapped springs a few times on SBC heads so it wouldnt be a big deal.

All times are GMT -5. The time now is 01:31 AM.