vats
 

im getting sick of my camaro the vats is causeing my car not to start is there a way i can get rid of the vats i want to get the car running again can anyone help me

You can either get a reprogrammed prom to ignore vats or bypass vats with the right resistor.

hey i thought i had the same problem, until i checked my battery terminals, be sure that you have a good connection and its not loose. those side terminals suck. if all else fails and u need to know how to disable it, hit me up on aim

wht kind of resistor do i need what size

Check this link out... http://tpiparts.net/vehicle_anti_theft_system__vats_/
Basically you need to measure the resitance in the factory key and thats the resitor size you use..
If there is a problem with the vats module then it may not work. Its easy to get a new prom or burn one yourself to eliminate vats with the right equipment.

who can burn me a new chip

i took out the vats box and the car still dont start

The computer needs a signal from the vats box that says the correct key is in the ignition. Without the vats box you need a new prom that ignores the vats signal.

the car still wont crank

The car won't crank unless you either have the vats system complete and working properly, or bypassed either by burning a new chip or installing the correct resistor.

- Justin

Painless has chips that have vats removed or vats bypass kits.. http://store.summitracing.com/egnsea...115+4294924927