NJFBOA - Home of New Jersey's Camaros and Firebirds

NJFBOA - Home of New Jersey's Camaros and Firebirds (http://www.njfboa.org/forums/index.php)
-   General Tech (http://www.njfboa.org/forums/forumdisplay.php?f=37)
-   -   Motor Swap Qs (http://www.njfboa.org/forums/showthread.php?t=48152)

LS1ow 11-18-2009 04:10 PM

Motor Swap Qs
 
hey guys, as some as you may have seen i picked up a roller and im swapping my motor and trans into it. but heres the thing... the old car was a 93(speed density,OBI) and the new car is a 95(MAF,OBDII) The roller does not have the "computer" itself but it does have the rest of the harness. So my question is, can i just take the "brain" from my 93 and plug it into the harness thats there? or do i need to tear about the whole thing and switch it?

LTb1ow 11-18-2009 04:12 PM

Gonna say no. 93 ECM would be a prom chip, 95 PCM would be a flash memory.

JerzLT1 11-18-2009 04:22 PM

you can do one of two things, convert the engine to 95+ with a vented opti and the whole nine yards or swap the harness. i would personally just go with an EFIconnection setup for tuning purposes since thats what ill probably be doing shortly anyway

Pampered-Z 11-18-2009 04:37 PM

No, you will need the same year harness+ECM. Just off the top, 92-93s harnesses have different pin configurations, such as batch fire W/22lb injectors, 94+ and sequential and 24LBs, and the opti etc. Dash feeds for gauges such as speed-O, If it's an auto then there are more issues, 93s were 700R4 trans, no provision for the 94+ electronic trans controls.

LS1ow 11-18-2009 04:50 PM

Quote:

Originally Posted by Pampered-Z (Post 656398)
No, you will need the same year harness+ECM. Just off the top, 92-93s harnesses have different pin configurations, such as batch fire W/22lb injectors, 94+ and sequential and 24LBs, and the opti etc. Dash feeds for gauges such as speed-O, If it's an auto then there are more issues, 93s were 700R4 trans, no provision for the 94+ electronic trans controls.

well i dont have stock injectors in the car, now a stock trans(th350)

LTb1ow 11-18-2009 04:54 PM

Quote:

Originally Posted by Pampered-Z (Post 656398)
No, you will need the same year harness+ECM. Just off the top, 92-93s harnesses have different pin configurations, such as batch fire W/22lb injectors, 94+ and sequential and 24LBs, and the opti etc. Dash feeds for gauges such as speed-O, If it's an auto then there are more issues, 93s were 700R4 trans, no provision for the 94+ electronic trans controls.

Miss that part? :nod:


Just get a PCM from a 95.

LS1ow 11-18-2009 04:55 PM

Quote:

Originally Posted by LTs1ow (Post 656412)
Miss that part? :nod:


Just get a PCM from a 95.

indeed i did.

LTb1ow 11-18-2009 04:57 PM

Hit up a junkyard or ebay for a used 95 PCM. Shouldn't be that much.

LS1ow 11-18-2009 04:58 PM

Quote:

Originally Posted by LTs1ow (Post 656416)
Hit up a junkyard or ebay for a used 95 PCM. Shouldn't be that much.

and then just get another tune?

LTb1ow 11-18-2009 05:00 PM

Well you may get lucky and call the tuner who did it the first time and ask them if they have it on file. Maybe they saved it and can load it on the 95 PCM. But again, the tune will be off. Speed density vs. MAF etc.

LS1ow 11-18-2009 05:01 PM

Quote:

Originally Posted by LTs1ow (Post 656422)
Well you may get lucky and call the tuner who did it the first time and ask them if they have it on file. Maybe they saved it and can load it on the 95 PCM. But again, the tune will be off. Speed density vs. MAF etc.

its a PCMforless chip. so pretty much im converting my car to MAF?

sweetbmxrider 11-18-2009 06:16 PM

Quote:

Originally Posted by LTs1ow (Post 656422)
Well you may get lucky and call the tuner who did it the first time and ask them if they have it on file. Maybe they saved it and can load it on the 95 PCM. But again, the tune will be off. Speed density vs. MAF etc.

not sure chips vs flash are the same

i would stick your 93 harness in there personally. they aren't hard to remove. some sensor pigtails may be different lengths and that would blow.

V 11-19-2009 12:15 PM

I also say swap the whole harness, maybe even dash w/harness too. its a little more involved yes but easier and then you can still sell off the newer harness.

edit: ...and did you say the stock 93 camaro trans was a th350? It was a 700r4 still with the TV cable, but maybe i missed somewhere in a diff thread that it had a th350 swapped in.

ib4200 11-19-2009 01:42 PM

no, he put a th350 in his car

LS1ow 11-19-2009 02:44 PM

Quote:

Originally Posted by SmokingSS (Post 656702)
I also say swap the whole harness, maybe even dash w/harness too. its a little more involved yes but easier and then you can still sell off the newer harness.

edit: ...and did you say the stock 93 camaro trans was a th350? It was a 700r4 still with the TV cable, but maybe i missed somewhere in a diff thread that it had a th350 swapped in.

:rofl: no, ive sinced swapped the TH350 into it

Featherburner 11-19-2009 06:34 PM

Quote:

Originally Posted by SmokingSS (Post 656702)
I also say swap the whole harness, maybe even dash w/harness too. its a little more involved yes but easier and then you can still sell off the newer harness.

edit: ...and did you say the stock 93 camaro trans was a th350? It was a 700r4 still with the TV cable, but maybe i missed somewhere in a diff thread that it had a th350 swapped in.

4L60 but close enough.

Czop418 11-21-2009 05:24 PM

4l60 and 700r4 are the same tranny :)

deadtrend1 11-21-2009 07:00 PM

Quote:

Originally Posted by Czop418 (Post 657548)
4l60 and 700r4 are the same tranny :)

yes, that was state. They are the same but just called 4L60 in 91-93 for f-bodies


All times are GMT -5. The time now is 04:44 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.