NJFBOA - Home of New Jersey's Camaros and Firebirds

NJFBOA - Home of New Jersey's Camaros and Firebirds (http://www.njfboa.org/forums/index.php)
-   General Tech (http://www.njfboa.org/forums/forumdisplay.php?f=37)
-   -   Gaskets (http://www.njfboa.org/forums/showthread.php?t=49843)

Bcozzi71 02-24-2010 10:19 AM

Gaskets
 
Over break im gonna be putting a new intake, carb, and cam into my 86 camaro. What gaskets will I need to buy before hand?

Intake gaskets
Water Pump Gaskets
Carb gasket

Anything else? Im trying to remember since I cant look at my camaro since im away at school....

WildBillyT 02-24-2010 10:36 AM

Quote:

Originally Posted by Bcozzi71 (Post 684197)
Over break im gonna be putting a new intake, carb, and cam into my 86 camaro. What gaskets will I need to buy before hand?

Intake gaskets
Water Pump Gaskets
Carb gasket

Anything else? Im trying to remember since I cant look at my camaro since im away at school....

Timing cover gaskets. Possibly valve cover gaskets. And a tube of RTV. How many miles are on your timing chain? Now may be a good time to replace it.

Bcozzi71 02-24-2010 10:44 AM

Quote:

Originally Posted by WildBillyT (Post 684203)
Timing cover gaskets. Possibly valve cover gaskets. And a tube of RTV. How many miles are on your timing chain? Now may be a good time to replace it.

Not sure about the timing chain, Im assuming that when the old owner rebuilt the 305 he replaced it but Ill have to double check.

Random question and unrelated but any idea how much a shop would charge to weld on a 3 inch exhaust from the header back. I already have a muffler I want to use.

WildBillyT 02-24-2010 11:03 AM

Quote:

Originally Posted by Bcozzi71 (Post 684208)
Not sure about the timing chain, Im assuming that when the old owner rebuilt the 305 he replaced it but Ill have to double check.

Random question and unrelated but any idea how much a shop would charge to weld on a 3 inch exhaust from the header back. I already have a muffler I want to use.

What exhaust system do you have on there now?

Bcozzi71 02-24-2010 11:04 AM

wow Summit has everything..I just found a Cam Change gasket set...

WildBillyT 02-24-2010 11:05 AM

Quote:

Originally Posted by Bcozzi71 (Post 684212)
wow Summit has everything..I just found a Cam Change gasket set...

Yup. Fel Pro, too.

Bcozzi71 02-24-2010 11:28 AM

Quote:

Originally Posted by WildBillyT (Post 684213)
Yup. Fel Pro, too.

I have a 305, I only saw ones from Mr. Gasket. Any good?

BonzoHansen 02-24-2010 11:35 AM

I usually use felpros

Valve cover gaskets
intake gasket & rtv
distributor (the overlooked gasket, lol)
carb to intake gasket
carb to air cleaner gasket (not sure what you have now)
water pump gaskets
t/c cover and seal (remember to lube the seal & balancer collar before you put it back on)
technically oil pan gasket, depends on experience I guess and condition of pan gasket. you might need to grind the tabs off the t/c cover. I've only done a couple so I'm not a pro at that, lol

good time to do hoses and clamps.

LTb1ow 02-24-2010 12:16 PM

Valve springs and valve stem seals perhaps?

Not sure if they were replaced or how aggressive a cam you are getting, but they would be on my list of things to replace as well.

Bcozzi71 02-24-2010 12:38 PM

springs are new and have been replaced already...plus its a REAL mild cam. Hydraulic Flat Tappet,262/272, Lift .420/.442,)


All times are GMT -5. The time now is 04:32 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.