NJFBOA - Home of New Jersey's Camaros and Firebirds

NJFBOA - Home of New Jersey's Camaros and Firebirds (http://www.njfboa.org/forums/index.php)

- General Tech (http://www.njfboa.org/forums/forumdisplay.php?f=37)

- - Tall valve covers? (http://www.njfboa.org/forums/showthread.php?t=50717)

WayFast84

04-08-2010 10:20 AM

Tall valve covers?

I am putting new rocker arms and a stud girdle on my motor and the valve covers are too short. What are the best valve covers with center bolts? I was looking at canton and they look good but don't have a breather hole. Is there any problems that can arise from that?

sweetbmxrider

04-08-2010 10:23 AM

drill a hole in it and put a breather in it. any tall centerbolt valve cover should work though if you don't wanna do that.

The Fixer

04-08-2010 11:08 AM

I have the Jegs tall covers on mine, and they're made pretty well. They have a hole in either side for the breather/PCV system.

http://i256.photobucket.com/albums/h...t_vc_close.jpg

All times are GMT -5. The time now is 10:26 PM.