NJFBOA - Home of New Jersey's Camaros and Firebirds

NJFBOA - Home of New Jersey's Camaros and Firebirds (http://www.njfboa.org/forums/index.php)
-   Welcome / Introduction (http://www.njfboa.org/forums/forumdisplay.php?f=58)
-   -   new member (http://www.njfboa.org/forums/showthread.php?t=52242)

mikey mort 07-14-2010 08:07 PM

new member
 
hey im a new member and i own a 96 trans am ws6. can anyone tell me about it. thankyou.

LTb1ow 07-14-2010 08:08 PM

It has an opti.

Tru2Chevy 07-14-2010 08:11 PM

Welcome to the club!

What type of info are you looking for?

- Justin

sweetbmxrider 07-14-2010 08:17 PM

welcome :cheers:

Quote:

Originally Posted by mikey mort (Post 716192)
hey im a new member and i own a 96 trans am ws6. can anyone tell me about it. thankyou.

sure, its a 96 trans am ws6 edition made by pontiac. it has 4 wheels and a go kinda fast sometimes pedal.

mikey mort 07-14-2010 08:20 PM

any kind of info, what you guys thinki should add to it, ups and downs, etc.

sweetbmxrider 07-14-2010 08:21 PM

nawz fo sho

LTb1ow 07-14-2010 08:22 PM

Well, since its not an LS1, your ETs will be up, and your opti will be down and out most often.

mikey mort 07-14-2010 08:28 PM

whats an opti. sorry guys im new to this stuff. and wouldnt nos wreck the engine?

LTb1ow 07-14-2010 08:31 PM

http://static.racingjunk.com/63/ui/3...ARK-DISTRI.jpg

Opti.

Nawzzzz is good for you.

FlyingDutchman 07-14-2010 08:35 PM

:welcome:

your engine = boat anchor :mrgreen:

mikey mort 07-14-2010 08:39 PM

must be a big boat............any type of headers u guys recomend?

LTb1ow 07-14-2010 08:39 PM

The good kind.

mikey mort 07-14-2010 08:46 PM

whats the MSD pic. you sent

MyFirstZ 07-14-2010 08:49 PM

thats the opti, there is a ton of information about your car all over the forum. Search around first see what you like. There are a ton and a hlaf things you can do to these cars. Specifics please. What are your plans ?

mikey mort 07-14-2010 08:53 PM

I have a three in. exhaust that came on the car so I was thinking to add the headers first

Anti_Rice_Guy 07-14-2010 08:57 PM

Welcome, where are you from?

mikey mort 07-14-2010 08:59 PM

northern NJ by the GW bridge

sweetbmxrider 07-14-2010 09:04 PM

http://lpparts.com/store/page6.html

shiny = good :nod:

mikey mort 07-14-2010 09:17 PM

thankyou very much thats just what im looking for. how long do u think it will take to install them? im only a beginner

sweetbmxrider 07-14-2010 09:18 PM

how much patience do you have? and what kind of tools/equipment do you have access to?

mikey mort 07-14-2010 09:22 PM

i have basic tools and i have good patience if its something im interested in. would i need a lift. what would u recommend for this job

ryanfx 07-14-2010 10:02 PM

Make sure you get headers that have 3 long tubes on each side with 1 shorty. It goes faster that way.

Tru2Chevy 07-14-2010 10:04 PM

Quote:

Originally Posted by mikey mort (Post 716239)
i have basic tools and i have good patience if its something im interested in. would i need a lift. what would u recommend for this job

http://www.njfboa.org/forums/showthread.php?t=51361

Read through this thread - lots of good info there about LT1 header installation. If you have any more questions about it, you can ask in the tech forums. :)

- Justin

NJ Torque 07-14-2010 10:11 PM

Welcome...

ib4200 07-14-2010 11:08 PM

Welcome! the headers will be fun


All times are GMT -5. The time now is 06:33 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.