|
Snj largest car/automotive yard sale ever
REMINDER FOR TOMORROW
Date: Augs 7-8th 2010 Time: Saturday-Starting at 12:00-7:00PM Sunday-Starting at 12:00- when ever its all gone.... Location: 132 Tuckerton Rd Shumong NJ 08088 Contact: Rj 609-556-zero six two one As Mentioned before- I have less then Two weeks to get 80% of this gone... I have 3 TRACKER TRAILERS Full of AUTOMOTIVE STUFF- 2 3Bay garages Full of Equipment and Supplies. I am using the trailers to move to NC - so will need them empty. Its unreall what I have. Alot is used but Alot is still in boxes. I have posted some F-Body stuff on here but I have been doing restoration and rebuilding cars for a long time. There is more old school stuff then new school- but its all there…. I will simply open the gates at 12pm on the 7th and the 8th of Augs, bring cash in hand and a friend to carry! NO REASONABLE OFFER WILL BE TURNED DOWN. THIS IS NO JOKE Examples of stock Complete Motors: Ford 5.0, Chevy 305 and 350 TPI, LT1’s and more Blocks: 305-350-400-454 Even a 455 from 77’ BanOne call for info- Have papers to prove!!!! 30 or more Carbs: Holly’s to Edlbrock, even Predator Carbs!! Manifolds- Everything from stock to match above to 18” High Rise to a Triple single carbs (hot rod style) 12+ grant wheels and assy new and old styles Starters, Alts, Radiators, Trans coolers, Mufflers, Clutches, Diffs, Gears, Mass air sensors, ecu’s, Gauge clusters stock and aftermarket, flex fans, shift kits, Headers, Dozens of Heads and Trans and Rears, Tires and Rims Body parts- from mustang fenders to F-Body Hoods to even a Model A trunk….New 69 camaro grills and spoilers and way more…. Way way way way way way more….. This as to be the largest ever NJ History. I have Cars Part Cars from Grand Am- Camaro-Trans Ams I have Titled Cars from 39 Buicks (almost complete) to 95 Trans Am ….. I have Snap on everything TransFlush unit- most tranny shops don’t even have this (2yrs old 6,000.00 unit) wont believe the Price I got! AC recharge units to Computer Dia’s- Air tools to Hand Tools to lifts and even a full size DRIVE UP RAMP!!! I am so serious about this I am asking for everyone’s help! Please Tell a friend and a Friend Twitter Facebook shop work fathers and more…please I am not into the computer to much so there are a hundred and one ways to get it out there! But I need it gone and am willing to work a major deal with anyone from the forum who dose come!!!! I will have everything outside and in trailers to sell! I am only keeping the 55’ Chevy- Chevelle and Harley, So please no offers. May even sell the 70 Camaro project ( Finished Drive Line and most of Body) Surprise sale of 88’ Gunmetal Trans Am Contact me for any details- as I will try to hit everywere I Can |
Any old SBC single plane intakes?
|
How much for an LT1?
|
How much for the blocks? 400, 454, 455 ?
|
Quote:
|
Quote:
Its Intake to Pan with all Assy- no wire no computer. |
Quote:
for the 454 and the 400, Let me get you pic - not junk at all-all done and ready! |
Got an 8.5" rear for a 1st gen?
|
C3 corvette parts? rough estimate on a quadrajet carb for a '75 350?
|
I'm very interested in this... will try my best to make it in truck :) and will also tell a lot of people.
|
BonzoHansen Got an 8.5" rear for a 1st gen?
Honestly if I do- its Camaro 67-69, but i wont say Yes nor No yet- will hit that secotion tomarrow jin1481 C3 corvette parts? rough estimate on a quadrajet carb for a '75 350? This is a deff yes-I have a personal soft spot for C3's I will get pic and info on all quads i have-plus i will get some what of a list of C3 parts- I know i have some from the below projects. Posted two Hoods in another thread but will get you more... "Note mine, but just finished-tons of work-barn rot" http://i151.photobucket.com/albums/s...s/DSCN7778.jpg This is my baby-hoping family member gets-asking 15K...95% done....Drive line is sick http://i151.photobucket.com/albums/s...s/DSCN7775.jpg I truely hope so! Deff be worth your wild. Iceman_TA I'm very interested in this... will try my best to make it in truck and will also tell a lot of people. I want to thank everyone for the replys- It is overwelming and bit stressfull enough to have to do this let alone- How... I like the above- because it gives me somewere to start. At this point I am not too firm on pricing- so even the other threads-i can make some room for members... Thanks |
Oh Yeah I forgot...
Audio- i know some of you guys like Sound Systems... Now I a not gonna say its Yesterdays model but I got Head units -EQ's Amps Could Box's Couple Speakers and Subs - 10Disc Changers for the trunks and so on.... It'll all be out For the Sale as well Just another reason to mark the day |
I await pics of the rear. Please measure the total width for the rear end flange to flange, and measure the spring perches center to center
Do you have any other 69 Camaro (or 1st gen) parts besides the grill and spoiler? |
What old cars do you have for sale? if you could list model and price
|
Quote:
|
Quote:
Open to offers on- 39 buick sadan restro (dick tracy style), 70 Camaro Project (drivetrain and most of body is done) Other than that 84Vette, 86iroc's96, 88 Trans Am After that its newer.... |
Quote:
|
Quote:
NOTE: Thanks again Guys- Really need this help. I have a note book with 3pages from the posts, pms, and emails to get started with- I will be leaving here about 10:15 and going to work on the treasure hunt. I am going to bring the computer (sometimes i have signal-sometimes i dont) If i do- ill post threw out the day If not then I will be back on around 8pm Thanks Again- if anyone needs a faster reply for any reason 609-556-zero six two one Thanks |
Ill be coming over there either sat or sunday. I put the word out on my facebook. My brother-in-law may be joining me as well since hes doing stuff to his 69 chevelle. Tools is my main focus since you don't have a lot of 4th gen stuff.
|
Quote:
|
so tempting! i am lucky im in NY for a few weeks straight. otherwise id probably buy a ton of stuff i dont need. its very hard to control myself ... haha
|
LTs1ow;Any old SBC single plane intakes
Ok- I double checked and am corrected- only singles are for BB, sorry. 92RED;How much for the blocks? 400, 454, 455 ? 400 block- like to see 200.00 454 block-just sold today 455 block-true bandone 77' block (car #4, built by Trans Am Specialtys, NJ)-Car was built with the 455 and used as a double- 1/2 hafe threw car was returned to TAS and replace with a 400 to double a different car which was blown- motor- then was never re installed untill 82 when my Uncle (who worked for TAS-n how i came to all of this) installed it in his Muncho TA- when he sold car, he swaped the motor out for me to keep. I am a big SNB fan. _ Block is 500.00 BonzoHensan; 8.5" 1 Gen Stuff- Ok, I trashed them...dont know why i wasnt thinking last night- but i remebered to day.... I never really liked them and always swaped them out- teeth get crewed up and carrier always cracked- so my first thought was- shoot, gotta havea couple of them...but when i really started looking i recalled...scaping them out awail ago...Sorry, on the up side- i have gears and posi kits as well as carriers for the 8.5" but not the actuall rear- I also do have other 1st Gen Stuff- I already found stuff but will make a list and post in a thread for those-since i got a couple replys on 1st Gen stuff. Also have 2nd Gen stuff- expecially headers, i filled a whole bay today (litterly whole floor) Long tubes, Short Tubes...galour... NOTE: I got alot of reply on motor and blocks- Right now I still have the LT1 best offer 2 Jasper 350ci carb motors ( one was in car, 88 vette-one was in truck) 4 bolt mains 327 with Aluni Intake and 3/4 cam 600.00 obo 400 stroker .60 over special made barrings Forge Pistons Aluni Heads Roller Rockers Torque Intake- Very Radical motor....Need reall CAR for this...1500.00 firm I also dug up 3 fuel cells brand new and 4 used- but great condition.... Personal Note: This is truely sad and depressing but worst part is....Why isnt all this stuff in my CAR... |
Any t5 shifters?
|
Would like to get the 400 block.
|
Quote:
I will get some pics. I have about 12 auto-shifters 3x T5 trans 2(with everything to swap Auto -T5) 4X 700R4 4x 4speed lugers AutoTrans out of 96 camaro v6 Trans out of 89 mustang and believe it or not- but more.... |
| All times are GMT -5. The time now is 03:03 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.