Okay....So whats the difference Vette Damper vrs. Camaro Damper?
 

Yup....Mr. Know-it-all doesn't know the answer for this one. Anyone care to fill me in?

I do know that the hub on the vette damper is consiberally shorter than the camaro damper... Is the vette crank snout longer? As far as I knew all the cranks where pretty much the same in length, just differences in the webs & drilling and such.

p.s. Yes.... talking about LS1's here !!! 97-04 models

Pretty sure its the length, the vette runs different distances for the asc belt.

I am pretty sure its the distance the belts sit away from the motor, on the vette all the accessories are tucked up closer to the motor,

at least thats what i recall from when i bought my crate ZO6 LS6 for my SS and had to remove the vette balancer and install and F body one.

Vettes must use a different front cover than, I compared the the vette balancer I have vrs. fbody one, and if I was to press the vette one on all the way it would bury it into the cover and rub. wonder if the vette has a stopper/collar that goes in front of the oil pump to keep this from happening.

ahhhh.... who knows, all that matters is that this brand new sfi vette damper does no good for me. (good thing I got a deal on it !!! lol)

nah, it can't have anything like that, i put an Fbody balancer on my crate LS6, no issues with any collar/stopper. plus the covers all looked exactly the same.

not my pic but...

http://t0.gstatic.com/images?q=tbn:A...-ITO70q9mQ&t=1


here you can see how far the fbody balancer sits away from the cover

http://i32.photobucket.com/albums/d5...SS/crank-1.jpg





and finally, this is how much an f body balancer can move back before it hits the front cover...


http://i32.photobucket.com/albums/d5...S/balancer.jpg

notice here where the belt rides on the water pump pulley... towards the outer edge...

http://i32.photobucket.com/albums/d5...luidamprSS.jpg



and here on the ZO6 crate engine, notice where the balancer lines up on the water pump, all the way to the inside....

http://i32.photobucket.com/albums/d5...S/ls6crate.jpg

Who makes that balancer?

looks like it says fluidampr right on it. :)

yup fluidampr, that was my second one(3rd overall on that motor)...

this is how my 1st one, had new GM bolt, ended up after leaving my car at the 1000' mark at island...

http://i32.photobucket.com/albums/d5...S/balafter.jpg

and the damage it did... (it also dented the water pump pulley so thats why i went to an electric one)...
...k member bent up on corner...
http://i32.photobucket.com/albums/d5.../ssdamage1.jpg


tire rod bent...

http://i32.photobucket.com/albums/d5.../ssdamage2.jpg


and this was my 1st balancer... do not trust professional products....

http://i32.photobucket.com/albums/d5...ancer2part.jpg

Thanks, I thought so but I am not familiar with the logo.