massive list of hardcore motor parts, and th400 convertor
 

Dart little M engine block – 4.030 bore, will need to be honed/bored but PLENTY of meat to rebuild it. 350 mains - $1700

Eagle 4340 crank , 3.480” stroke for 6.0 inch rods, std sizes never ground. - $400

Eagle ESP H beam rods 6.0 inch with custom JE nitrous pistons 4.030 bore (also including 3 spare pistons as well that are new), 10.3:1 compression with a 67 cc head- $1000

Brodix SBC race rite 200cc heads with 1.550 valve springs (comp cams part 938-16), and 7/16” studs and guideplates. - $900 pair

Moroso blueprinted oil pump for SBC - $80

Moroso oil pan part number 19510, chrome in EXCELLENT shape, 6 quart capacity , will include oil pickup $170

Polished aluminum SBC timing chain cover - $30

Polished aluminum timing tab - $10

Summit racing SFI dampener part number SUM-B64262- $170

Pete Jackson noisy gear drive for SBC - $100

Comp cams SBC 4/7 swap solid roller cam, .624/.645 lift , 250/262 duration at .050, 112 LSA , at 108 centerline - $250

Comp cams solid roller lifters part number 818-16 - $300.00

Comp cams chrome moly pushrods part number 7972-16 - $110

Comp cams Pro magnum 1.52, 7/16” rockers part number 1304-16 - $225

Transmission Specialties th350/th400 convertor part number 900XHDLS - $600.00


Please do not lowball me, ask about trades, or payment plans etc, I take cash, USPS money order, or paypal (+3.5% for fees I incur). I will be more then happy to try and meet up with people if they are local, etc. If interested in any of these items please email me at camaroracer1992@yahoo.com . I have these items listed on MANY sites so email is the best way to get a hold of me.

Does that oil pan come with a windage tray? or is one available for it?

it has a baffle door in it for for/aft movement, as for a windage tray you would need to contact moroso.

ok thanks