NJFBOA - Home of New Jersey's Camaros and Firebirds

NJFBOA - Home of New Jersey's Camaros and Firebirds (http://www.njfboa.org/forums/index.php)
-   Lounge (http://www.njfboa.org/forums/forumdisplay.php?f=26)
-   -   Picked up a 95 Talon (http://www.njfboa.org/forums/showthread.php?t=56684)

4thGenJunkie 07-20-2011 03:40 PM

Picked up a 95 Talon
 
Just got a Talon TSi AWD for $600. All it needs is a clutch and some connect the dots with the wiring. I'm pretty excited about this project always wanted a turbo car and I figure this would be a good decently cheap place to start. Anybody got advice, warnings, etc????

Blacdout96 07-20-2011 03:52 PM

See crank walk, walk crank walk.

certain year built blocks had crank walk problems, so check into that ( I'm not sure what year blocks). also make sure the seals on the turbo are good, and no play int he shaft. and might want ot replace timing belt/waterpump if it hasent already.

Mike 07-20-2011 04:11 PM

Quote:

Originally Posted by Blacdout96 (Post 776296)
See crank walk, walk crank walk.


http://i27.photobucket.com/albums/c1.../crankwalk.jpg


:mrgreen:

4thGenJunkie 07-20-2011 04:14 PM

its a 6 bolt they dont get crank walk that was only early 7 bolt blocks and i just bought the 16g yesterday cause the stock little t25 was shot. When i bought the car there was a new timing belt and tensioner in the trunk so I'm gonna change that.

4thGenJunkie 07-20-2011 04:14 PM

Quote:

Originally Posted by cbrrmike (Post 776300)

LMFAO

Blacdout96 07-20-2011 04:19 PM

Well if shes in that kind of shape, maybe replace the valve cover gasket if shes leaking, and if not, finish connecting the dots and enjoy! I do like the look of the gen 2 eclipses and talons.

NastyEllEssWon 07-20-2011 04:24 PM

i dont know if its the 4g motor as well but i know a lot of mitsubishi motors have problems with the balance shaft breaking and causing all types of hell. get an eliminator kit asap

4thGenJunkie 07-20-2011 04:28 PM

http://www.youtube.com/watch?v=2zY3YiBdY2c

yea the only thing i wanna do is get a 2gb front bumper like the 98 99 style only problem is the car has some custom color on it that would be a pain in the ass to match

4thGenJunkie 07-20-2011 04:29 PM

Quote:

Originally Posted by NastyEllEssWon (Post 776306)
i dont know if its the 4g motor as well but i know a lot of mitsubishi motors have problems with the balance shaft breaking and causing all types of hell. get an eliminator kit asap

balance shaft removal kit :)

band77one 07-20-2011 04:29 PM

dsm= lot and lots and lots of headaches. have fun with they are fun cars while they are running. my cousin had like 6 lol.

sweetbmxrider 07-20-2011 04:44 PM

Manual boost controller :)

4thGenJunkie 07-20-2011 04:46 PM

got an electronic one already came with the car

transmaro93 07-20-2011 04:47 PM

Dont wanna rain on your parade.. so im just gonna wish you luck with it....

maroman88 07-20-2011 05:02 PM

Quote:

Originally Posted by transmaro93 (Post 776319)
Dont wanna rain on your parade.. so im just gonna wish you luck with it....

what this guy said

LS1ow 07-20-2011 06:23 PM

its AWD. Its Boosted. Have fun with it

NJ Torque 07-20-2011 10:37 PM

good luck....

4thGenJunkie 07-21-2011 02:50 PM

Thanks 25psi + awd + snow = :)

NastyEllEssWon 07-21-2011 03:49 PM

Quote:

Originally Posted by 4thGenJunkie (Post 776549)
Thanks 25psi + awd + snow = :)




lol Upped boost, crappy transfer cases, dookie motor + dsm = not making it to winter

Wolfblitz 07-21-2011 04:43 PM

Crank is gonna walk faster than the car will move....but good luck with it man lol

ib4200 07-21-2011 05:02 PM

im pretty sure its the 1st gen motors that dont walk and the 2nd gen motors that do. In all reality all fun cars are unreliable imo so just have fun

zuuhlsT/A 07-22-2011 07:55 AM

Big 16g turbo, Dejon Tool modified SMIC, Pacesetter header, hard upper and lower intercooler tubes, APEXI SAFC , 550 cc injectors, Walbro 255 fuel pump, Aeromotive FPR, Greddy BOV, hacked airbox with K&N filter, rebuilt head, water pump, radiator, Center Force clutch, OBX short throw shifter and knob

This is what I did to the 91 GSX I owned. Transfer case always made a little noise but it didn't affect performance. That car handled like it was on rails. Word to the wise replace the stock head gasket if you push the boost over 16. I had mine at 18 and boom went the headgasket.

4thGenJunkie 07-22-2011 03:10 PM

Quote:

Originally Posted by zuuhlsT/A (Post 776708)
Big 16g turbo, Dejon Tool modified SMIC, Pacesetter header, hard upper and lower intercooler tubes, APEXI SAFC , 550 cc injectors, Walbro 255 fuel pump, Aeromotive FPR, Greddy BOV, hacked airbox with K&N filter, rebuilt head, water pump, radiator, Center Force clutch, OBX short throw shifter and knob

This is what I did to the 91 GSX I owned. Transfer case always made a little noise but it didn't affect performance. That car handled like it was on rails. Word to the wise replace the stock head gasket if you push the boost over 16. I had mine at 18 and boom went the headgasket.

Ive seen cars on big 16g's do work. I'm gonna be running 25 lbs on mine. Where did u get the intercooler piping cause I picked mine up but with no piping -_-. I got 750cc injectors with the car and ECM link for cheap.

zuuhlsT/A 07-22-2011 08:29 PM

Believe it or not it was all on Ebay and cheap. Got car for nothing( installed a fence) parts and labor were about 2K and I had a car with 313HP. Silicone couplers with the t clamp bands are a must. Everything else will just weaken and blow off after time.

Got to my Fquick garage and pics of the car are there. Yeah I kinda went a little ricer but I feel it was tastefull and subtle.

4thGenJunkie 07-22-2011 08:39 PM

You dont happen to have anything for it layin around I'm trying to pick up as much spare stuff as possible for cheap. Ill have pictures up soon I'm going to keep it stock looking for the most part just get the 2gb front bumper and some different wheels due tothe fact ill be running 15inch rotors lol

zuuhlsT/A 07-22-2011 08:52 PM

Wish I could help you out but I sold the car like 6 years ago and got nothing left. it was a budget build so everything I replaced I sold. FYI popular upgrade for those cars was the 1G BOV which was metal and solid not like the plastic ones on the 2G which leak. Good luck with the build and keep me posted. I sold the Eclipse because I found a 95 T/A for $1700 that needed TLC. I love Firebirds so the DSM had to go.


All times are GMT -5. The time now is 12:35 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.