NJFBOA - Home of New Jersey's Camaros and Firebirds

NJFBOA - Home of New Jersey's Camaros and Firebirds (http://www.njfboa.org/forums/index.php)
-   Engine / Power / Tuning (http://www.njfboa.org/forums/forumdisplay.php?f=31)
-   -   95+ Gen 1 SBC? (http://www.njfboa.org/forums/showthread.php?t=60804)

zraffz 07-29-2012 01:07 AM

95+ Gen 1 SBC?
 
I've recently finished putting together a rebuilt 350 from a 1997 K1500 Suburban.
Today I wanted to fire the motor up and realized I lost all the accessories that came on the motor. I do however have a serpentine setup off another GM. Upon closer inspection I noticed the stock vortec water pump has a coolant bypass on the water pump to let coolant cycle while the thermostat is closed. If memory serves me correctly, during a conversation today I was told the coolant bypass on the older motors is built into the block & heads.

Would I be able to use the serpentine setup that doesn't have the coolant bypass built into the water pump? How would I go about making this work without spending money on all new accessories/brackets/pullies?


All times are GMT -5. The time now is 01:48 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.