NJFBOA - Home of New Jersey's Camaros and Firebirds

NJFBOA - Home of New Jersey's Camaros and Firebirds (http://www.njfboa.org/forums/index.php)
-   General Tech (http://www.njfboa.org/forums/forumdisplay.php?f=37)
-   -   shakeing (http://www.njfboa.org/forums/showthread.php?t=61546)

chrisfrom nj 10-08-2012 07:20 PM

shakeing
 
im working on my dads 93 dodge b250 van it shakes really bad at 45-55 mph i changed the u joints on the driveshaft and took it out on a test drive it was good when you drive normal when you bring it up to speed it shakes alot can someone help me

grazi 10-08-2012 07:41 PM

Did you try balancing the wheels?

BonzoHansen 10-08-2012 07:54 PM

Vibration Diagnosis Flow Chart

chrisfrom nj 10-08-2012 08:04 PM

grazi the wheels were balanced

thanks bonzo i will follow the chart tomorrow

FIcamaroRE92 10-08-2012 09:43 PM

Rear pinion angle?

Phoenixfire1989 10-09-2012 05:47 AM

alignment? try going above that speed by a little bit and see if its stops =)

1320B4U 10-09-2012 10:42 AM

Rotate tires and try it...could have been a belt that has shifted.

chrisfrom nj 10-09-2012 06:41 PM

Quote:

Originally Posted by FIcamaroRE92 (Post 854492)
Rear pinion angle?

i will check it

Quote:

Originally Posted by Phoenixfire1989 (Post 854506)
alignment? try going above that speed by a little bit and see if its stops =)

i need to change the ball joints and tie rods

Quote:

Originally Posted by 1320B4U (Post 854553)
Rotate tires and try it...could have been a belt that has shifted.

i rotated the tires one tire had a bubbles in it and there were 2 bent rims i got all that squared away the front end is the prob ball joints and tie rods


All times are GMT -5. The time now is 05:04 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.