Who is ready for spring?
 

I've gotten my entire suspension replaced on my 94 Z28 for spring. New BMR A Arm assemblies, Bilstein shocks, with Eibach springs. New GM sway bar bushings and links for the front and the rear, new rear lower control arms, New Panhard rod, new torque arm mount, new trans mount, new engine mounts. Also replaced the fuel pump and sending unit with AC Delco since I was back their. I replaced my water pump. Replaced all my burned out bulbs. Need to change the oil now. Gotta do a power steering fluid flush, as well as a brake fluid flush. Just about ready for another reliable year of F body enjoyment. Once I get this car squared away, its on to my other two that are pretty much only needing fluid changes. Then all 3 will be ready for Spring of 2013! I'll be cruising every weekend their is sun. Who else is ready for spring, or getting ready at least?

I just need to unplug the battery tender, check the psi in the tires, and hop in!

WINTER RULES! :twisted:

Basically thats it for the SOM along with a good wash.

Just dropped the LT1 off at the chassis shop today. So when I get that back I just need to do a few little odds and ends and that will be done.

In about a month my new trailer will be here, so will need to do a few things to that when it comes.

Just need to install intake manifold, converter maybe a new trans, and tune. Then im good (was good up to today lol). Probally gonna try to get a track rental going in spring.

I just need to get some pieces painted, grease up the lower control arms and I'm good. Not excited to see the $$ difference in cruising in car vs cruising on bike :|

I need to finish my Stereo (amp, speakers, sub) install, test and put the dash back together and replace the front wheel bearings. Then a wash, wax, detail and ready to go! I usually find a place to go every week when the weather is nice! I am building my central NJ cruise calendar as we speak. Should be ready to go by April after everyone updates their cruise/show info :D

Need to change fluid, transfer case should be fun. Then some tints and I am all set.

you guys crazy, if it isn't raining or snowing or there isn't salt on the roads im driving mine. she doesn't get put away

The Z is ready, just have to connect to battery. The SS will be getting retinted, any maybe new rubber...but for the most part its ready.

I drive mine regardless of those, just that 4th gear went and othera are acting wierd so back apart she goes

It'll never finish.

no need to wait until spring or a sunny/salt free day. fbodies were ment to be driven all year long and are a blast to drive in the snow and ice.

:rofl::rofl::rofl::rofl::rofl::rofl::rofl:

I have a Rusty 76' I am working on now replacing a rear frame rail then I have to patch panel every body part, full exhaust, manifold, carb, tuneup, prep and paint.

After I am done with that in March I have to decide Sell my 94'Z28 vert or touch up a ding or 2 and paint then sell cause I need a truck.

I still have to Finish my Vette which needs to transform from race car back to street ... New gas tank fuel pumps, rework interior wipers and headlights would be a nice option etc. In the meantime I will ride my motorcycle.

Vette is away in storage, just gotta plug the battery back in come spring.
TA is fine, but needs a new cat and id like to paint the hood
Camaro is parked (3 years now!) with a nasty trans leak, maybe ill get it towed to the shop in the spring, i sent away for QQ plates so maybe that will spark some motivation
Blazer is having ABS issues, needs a fuel tank pressure sensor, needs front bottom ball joints... im sure more will break soon lol but this is my DD

I've got a big boxful of suspension and brake parts to go into the GTA - waiting for a rod end for the panhard rod to finish up the rear; then the front goes under the knife...

I jump started mine and raised some hell in the streets just now.

I detailed my engine again for the umpteenth time, lol

Not me, engine isn't finished yet. I'm hoping to be ready by the second week of March at the latest.

If Spring in NJ could start next week that would be great! Just need to finish connecting a wiring harness, add fluids, connect the torque arm & driveshaft and its game on for a test run of my Frankenstein.

I got the 96 back thursday. I could have the interior back in and pretty much done this week coming up, if i wasn't going to be in Florida all week .... :evil:

Working on the Lemon was great, it was beautiful today! 8-)







LONG LIVE WINTER!

Florida? Wow, lucky you!

im ready for the spring clean ups so i can get back to work and make money