Assorted 4th gen stuff and more
 

Camaro
93-02 GTS REAR blackout covers SOLD
98-02 front bumper IMPACT assembly w/foam $100
93-97 front bumper IMPACT assembly w/fogs $100
93-97 fenders (R or L) red, $100 ea
93-02 rear tail panel, blue or red, $50 ea
93-02 doors (R or L) blue or red, $100 ea
93-02 Hatch w/base/z28 wing(colors: Pewter red or blue) $60 ea
93-02 base wing spoiler, red, blue, green-grey, pewter, $20 ea
97-02 drivers airbag $40
93?-02 passenger airbag $40
'97 30th anniversary grey cloth seats, set $200
97-02 dash vents driver or passenger $15 each(from '97 so lighter grey I think)
93-96 dash shell $150
93-96 dash cluster BEZEL $40
97-02 passenger taillight SOLD
97-02 camaro taillights, daily driver quality only(delamination), pair $10
93-02 mirrors, black or silver, $50 pair

Firebird/Trans am
98-02 base/formula front bumper $150
98-02 base/formula front bumper IMPACT assembly w/fogs $125
93-02 base/formula rear bumper $50
93-02 Firebird passenger door, red $100
93-02 base firebird/formula hatch $10
93-02 firebird/trans am driver rear 1/4 panel $350
93-02 firebird/trans am passenger rear 1/4 panel $350
93-02 F-body front "frame" structure, basically firewall forward $350
98-02 driver headlight SOLD
98-02 passenger headlight SOLD
98-02 honeycomb taillights w/center firebird filler SOLD
93-02 taillight filler, assorted ones, $25 ea
93-02 mirrors, red $50 , green $35

4th gen Engine/mechanical
2001 LS1 camshaft $40
82-02 Energy suspension poly trans mount $2093-97 LT1 SLP CAI $120
82-02 STEEL driveshaft, Three rivers, from '02 formula
LS1 oil pan w/pickup only(no windage tray, oil level sensor, or bolts) $200
2002 241 heads, assembled, w/rockers $125
2002 throttle body, no sensors $50
LS1 AC bracket w/compressor $50
82-02 BOXED OEM rear LCAs, painted black, could use new bushings, $25
LS4 coils on brackets, 7 coils only, one harness damaged $75
LS4 rocker arms $40
4th gen T-tops, $80 pair, $45 ea, 5-6 sets available
4th gen washer fluid tanks $20 ea
3.4l v6 AUTOMATIC transmission 4l60e, from '94, 122k miles, $100
3.8l v6 AUTOMATIC transmission 4l60e, from '99, 107k miles, $100
LT1 AUTOMATIC transmission 4l60e, from '94, CORE, $40
LS1 AUTOMATIC transmission 4l60e, from '02, 40k miles, SOLD
93-02 Torque arm $20
1993 10 bolt rear axle assembly, no brakes $80
98-02 10 bolt 4ch axle shaft $50
98-02 zexel torsen differential, 3.42 ring gear, carrier needs a bolt, c-clips, center block. one bearing. no pinion gear. $50($75 if I can find the clips and block)
richmond gear 82-02 10 bolt install kit, 85% complete, $20
98-02 power steering rack, maybe 93-96 too. $100
99 v6 k member complete $100
94 v8 k member complete $100
3.8l engine mount stands $10
LS1 engine mount stands $40

Other stuff....
Th350 auto trans, $60, better than just a core
'87 305 long block, running condition, $100
"010" 350 engine (intake to pan), rebuilder condition, $100
"Doug Herbet" solid roller cam, was in 383sbc, $100
Crane solid roller lifters $100
4ft 3" exhaust piping $20
78-88 g body/monte ss ac/heater box
88 monte SS driver fender $150
94-02 s10 blazer rear folding seats $40
94-02 2dr S10 blazer headliner, no sunroof $50


I'll add more as I think of them or come across stuff I didn't know I had. The listed stuff so far is probably less than a 1/4 or so of what I have.

Any pics of the 010 block and what needs rebuild on it?

hey paul we were in touch about 98-02 gray interior parts do you have any? also what kind of condition are those t/a filler panels?

I will get pictures this week.
The motor came out of a parts/project car I got. The install was never completed. The exhaust, carb, and accessories were never installed. The block did look to have been painted though. I know nothing else about it, hence why worst case scenario its a rebuilder.

I do have grey panels but they are currently impossible for me to get to. They are all stacked on my vette and behind shelving I installed months ago. I am slowly trying to dig through the garage and organize stuff. There are parts from at least a dozen cars so trying to remember or figure out what is from which gets a little tough. For a specific color match, you'd have to come here and I can pull the interior parts out then to check for the correct shade of grey.

The fillers are in good shape, one is from a formula and has the red firebird logo, the other is from a Trans am but the logo is completely faded away. It looks pure black, but in direct light you can still see the outline of "Trans Am" and the bird. I have a set of honeycomb lights listed on ebay currently and one filler of the buyers choice would be sold with them. I may even have a 3rd filler though too with some green over spray.

You wouldn't happen to have a set of rear stock or aftermarket LCA's with hardware would you? I was told they are interchangeable between 3 and 4 gens. The bolts and sleeves on mine have basically welded themselves together.

Yes, I have several sets,
stock set - $10 (2-3 sets available)
stock BOXED set - $20(should have new bushings installed though)
tubular aftermarket set poly-poly, $50

Stock trans mount for a 60e?

Hey Paul,
I'll take the aftermarket ones. You got hardware? Don't have time to chase those parts down. PM me when and where is good for you.

Kurt

PM sent

Still have the turbo 350? Location?

yes I do, Closter NJ 07624

any stock LS1 auto transmissions?

Nah, I recently sold the one I did have.

Hey Paul, Stepdaughter decided to hit a guardrail last night in her 02 Camaro. Need front nose, hood, passenger fender and assorted brackets.

far shot- any GTA wheels?

If you only lived closer i would grab it.

nah sorry, keeping the one set I have on my 88 GTA

If I ever head down towards south jersey to pick up a car or parts, I could bring it with me. As of right now I don't have plans to but who knows. In that case, I could let you know in case you'd still want it then.

Yes definitely do. I m usually on here once every few days. Thanks

Paul,
I'm looking for the bracket that fastens the side skirt to the body on Trans Ams. Do you have one?

http://ls1tech.com/forums/attachment...0706150418.jpg
http://ls1tech.com/forums/attachment...706150418a.jpg
Ignore the caption, unlike the photographer, I DO need this pictured part, :lol:: http://s155.photobucket.com/user/Tom...10042.jpg.html

well... I know I probably have it. Question is where it is, that I do not know. I wouldn't have a chance to look for it until at least late next week.