NJFBOA - Home of New Jersey's Camaros and Firebirds - View Single Post

V · 12-16-2004, 04:43 PM

its pretty easy to pull. first you need to pull the hatch carpeting back and remove the taillights, 3 wingnuts for each side. then you will see i think 4 10mm nuts(the studs are on the panels and stick through. one nut will be on the outside edge of the panel(inside the trunk) and the other 2 are spaced about where the inner edge of the taillights are. it takes about 15 min to fuly remove and replace, check ebay for the panels, i got mine for $25. and 93-02 are all the same either v6 lt1 or ls1.

12-16-2004, 04:43 PM	#9
V Stalker Join Date: Aug 2004 Posts: 12,082 iTrader: (12)	its pretty easy to pull. first you need to pull the hatch carpeting back and remove the taillights, 3 wingnuts for each side. then you will see i think 4 10mm nuts(the studs are on the panels and stick through. one nut will be on the outside edge of the panel(inside the trunk) and the other 2 are spaced about where the inner edge of the taillights are. it takes about 15 min to fuly remove and replace, check ebay for the panels, i got mine for $25. and 93-02 are all the same either v6 lt1 or ls1.