Thread: Removing GFX
View Single Post
Old 01-21-2005, 12:51 AM   #6
V
Stalker
 
V's Avatar
 
Join Date: Aug 2004
Posts: 12,077
iTrader: (12)
ok, i'm an expert at dismantling... ask anyone who has seen my garage, lol

first off, ill start with the bad news, the front nose ground effects are part of the entire bumper cover and not removeable. The bumper cover isnt too hard to remove itself, but 3or4 bolts per side are inside the fender and its easier to do if you remove the headlights and hood latch support panel first, .

The fender ground effect are pretty basic, 2 screws inside the wheel lip(they point forward) then 10mm row of bolts along the front, dont be surprised if they snap.

It can get pretty conplicated with all the splash gaurds under there since like every piece is conected to every other peice if 5 different ways. If you want my opinion, try to load it with all the gfx in tact, it will save you MANY headaches, just get a a few 2x6 pieces of wood and angle the dolly enough that it'll clear. If you must remove it all, I can provide pics, but let me know asap since the 88 gta i have will be getting scrapped tomorrow night.
V is offline   Reply With Quote