|
i have some specs on my cooling system. i have a 2 row aluminum radiator(cant remember wich company), brand new aluminum water pump, 160 thermostat, and two 11 inch be-cool fan in a built in shrould. the fans are rated at 2750cfms. that should be plenty. i also installed an autometer water temp gauge with the sending unit in the intake manifold. im not sure how accurate it is because a couple of night ago my friend brought over his lazer heat gun and the gauge was reading about 20* hotter that the sending unit was. the factory gauge was telling me that it was running about 150*, but i know that gauge is way off. im kinda thinking that there might be some air stuck in there, because those fans should be enough to cool that motor.
im not going to be able to go cruizing just yet. with this motor my 2 1/2 inch cowl hood does not close. so now i have to get a 4 inch cowl hood. i plan on going to the indian hills high school show this saturday. so if you want to check it out just stop buy, i should be there.
79CamaroDiva i cant believe that. you are the first person that i have heard a bad thing about scott. i did alot of research about this company and everyone had nothing but great things to say about him. as for my motor, the deal was done through a friend of a friend of a friend. so that friend made sure that my motor but together even more anally that any other one. which makes me pretty confident in this motor. sorry to hear about your eperiances with them, but at least you are ok. i bet that was a sight to see.
|