while you are at it get yourself some gasket material or another gasket and some longer screws to move teh injector tower up a little. it will allow the fuel cone to be spread wider as it accelerates through the tb, better fuel atomization. that makes better throttle response.
it will also create a larger space for air to get into the tb without the interference of the injector tower creating a little bit more high rpm flow.
the stock tb and injectors can easily handle over 300hp with correct fuel pressure and pump.
you have to make an adaptor to put the tbi unit on top of a 4bbl intake. it does not bolt down teh same as a 2bbl carb.
later
tim
|