Quote:
|
Originally Posted by Slow Z
It'll fit but you'll have to do some serious beating/grinding to the inner fenders. I had 28x10.5 ET Drags and they hit the front part of the wheel wells (behind the doors) slightly. I imagine a 30" tall tire you'd have to probably cut out that area and weld up new metal more inward... You'd also have to grind down the LCA mount quite a bit.
|
Your so right,i have a 29.5 x 10.5 ,Phonenix firestone and MT slicks, and your right alot of cut front and rear fender well openings, as well as the inside coil spring pocket,and buy new smaller LCA just so they clear, why a 30" slick, i'm changing to a 28.5 x 10.5 slick to get some more RPM's, try a ph-377 F/X (28.5x9) or a MT #3054 (28x9),if your not make alot of power a shorter tire will give you more RPM's.and a 5.5" Back space rim. JR1 & Little man