NJFBOA - Home of New Jersey's Camaros and Firebirds - View Single Post

The Fixer · 03-02-2006, 08:09 AM

Check and clean the connections for the MAF burnoff relay (I think that's the code you mean). You may need to replace the relay if that doesn't work. A hint it might be dead is after you turn the car off, you should hear a relay click on, then off like 2 seconds later. If that doesn't happen, then it's time to get the wiring diagram and make sure the relay is getting power at that time. If not, check the wiring. If it is getting power, then you can change the relay.

03-02-2006, 08:09 AM	#4
The Fixer Join Date: Aug 2004 Location: North Jersey Posts: 3,047 iTrader: (5)	Check and clean the connections for the MAF burnoff relay (I think that's the code you mean). You may need to replace the relay if that doesn't work. A hint it might be dead is after you turn the car off, you should hear a relay click on, then off like 2 seconds later. If that doesn't happen, then it's time to get the wiring diagram and make sure the relay is getting power at that time. If not, check the wiring. If it is getting power, then you can change the relay. __________________ Seeya, Steve R. in North Jersey '16 Go-Mango Dodge Charger R/T. It's so good to be back in a V8-powered, RWD car! Former Toy - '88 Monte SS - had lots of mods...