NJFBOA - Home of New Jersey's Camaros and Firebirds - View Single Post

IROCdan330 · 03-18-2006, 07:31 PM

No, you need to weld these in, thats the only option.

Basically after unbolting the LCA from the rear, you fit the metal box where the LCA went. It can only fit one way. You put a bolt in the old LCA bolt spot to keep the thing steady...make the top end flush to the axle housing, and weld. It shouldn't take a good welder any more than an hour. I'd say 50-75 bucks for an install at a reputable shop.

03-18-2006, 07:31 PM	#2
IROCdan330 12 Second Club Join Date: Sep 2004 Location: Vineland Posts: 928 iTrader: (0)	No, you need to weld these in, thats the only option. Basically after unbolting the LCA from the rear, you fit the metal box where the LCA went. It can only fit one way. You put a bolt in the old LCA bolt spot to keep the thing steady...make the top end flush to the axle housing, and weld. It shouldn't take a good welder any more than an hour. I'd say 50-75 bucks for an install at a reputable shop. __________________ 87 iroc with the usual go fast stuff heavier than your half ton.