View Single Post
Old 05-14-2006, 09:24 PM   #7
enRo
13 Second Club
 
enRo's Avatar
 
Join Date: Oct 2004
Location: Netcong, NJ
Posts: 5,799
iTrader: (6)
Quote:
Originally Posted by JL8Jeff
Did you trim the bumpstops in the rear? If not, check very carefully to see if the wheels/tires come too close when the suspension hangs down. If someone puts the car on a lift the bumpstops could gouge the wheels and cut the tires. Your wheels might have a different offset which gives you a little extra clearance. My 17x11 wheels have 50mm offset which is real close on the inside so I had to trim the bumpstops. The Sumitomo 315's run a little narrower than most other brands so they give some extra clearance.
Nope, no trimming needed. I even jacked the car up on its side and i had ALOT of room. I might just hammer in the inner fender for safety but other than that, its good to go . I think i only hit the fenderlip once and that was with 2 other ppl in the car, so backseats are going bye bye
__________________
2019 Toyota Tacoma TRD Pro ... M6, Voodoo Blue Fun Machine
1987 Pontiac Trans Am ... 305 TPI, T5, Project Car
enRo is offline   Reply With Quote