NJFBOA - Home of New Jersey's Camaros and Firebirds - View Single Post

Kat · 06-01-2006, 07:21 PM

Well since I just blew the 3rd rear I'm going on my 4th.. lol

Umm **** LS1 3.42 rear
AL DS
700 R4, transgo reprogramming kit, turbine tech 2500 stall 12" converter (going later this year)
Stock bottom end and heads l98 with the felpro 1095 head gasket (.015 compressed thickness so about 10:1 compression)
HSR
LT1 cam (going this month for a XR282)
LT4 rockers
Hooker 2064 headers with home made real 3" y-pipe, no cat, and a random tech 3" cat back
Spohn everything, (LCA, PHR, TQ Arm, a-arms, sfc's, and coil over kit)
Bunch of Moates stuff and a PLX Device WBO2
150 wet shot

and other **** that I forgot about over the years.

Best I've gotten so far is a 13.6@ 100 mph the last time I was at the track on a stock chip. (I had it tuned for stock TPI and a T56) When I did the HSR and auto swap I just burned a more or less stock AUJP chip for it, just so I can drive it.

So when I get time I'll run arround and tune it again, I will.

06-01-2006, 07:21 PM	#25
Kat 11 Second Club Join Date: Feb 2006 Posts: 932 iTrader: (2)	Well since I just blew the 3rd rear I'm going on my 4th.. lol Umm ** LS1 3.42 rear AL DS 700 R4, transgo reprogramming kit, turbine tech 2500 stall 12" converter (going later this year) Stock bottom end and heads l98 with the felpro 1095 head gasket (.015 compressed thickness so about 10:1 compression) HSR LT1 cam (going this month for a XR282) LT4 rockers Hooker 2064 headers with home made real 3" y-pipe, no cat, and a random tech 3" cat back Spohn everything, (LCA, PHR, TQ Arm, a-arms, sfc's, and coil over kit) Bunch of Moates stuff and a PLX Device WBO2 150 wet shot and other ** that I forgot about over the years. Best I've gotten so far is a 13.6@ 100 mph the last time I was at the track on a stock chip. (I had it tuned for stock TPI and a T56) When I did the HSR and auto swap I just burned a more or less stock AUJP chip for it, just so I can drive it. So when I get time I'll run arround and tune it again, I will. Last edited by Kat; 06-01-2006 at 07:24 PM.