|
to run TBI you have to convert the computer and harness along with changing intakes again, converting to an electric pump, plumbing in fuel return lines and all the other fun of going to fuel injection.
keep it simple matt!!! the wires are all different colors. pull the wire loom off the burned part and start at one end. take one wire at a time and follow it acrossed the burned section. if jsut the sleeving is cooked, throw some electrical tape on and call it done. if wires are damaged, cut out the f'ed up part and splice in soem fresh wire that is the same thickness.
you keep talking about conversions to different inductions adn engines and everything else. just work with what you have. if the LG4 does in fact die at some point you can always swap all the same stuff onto another 305 or 350 or any gen1 SBC if you want. even then, you will get to enjoy a running car for a while and learn a lot while you work on it.
|