|
HEY -- the angle of the head verses the intake --- the water can enter from under the bottom of the gasket in the front if the motor was a complete unit -- if it was not and all the parts are from different motors than the angles are at fault ( note ) #1 did you glue the intake down ? #2 did you put anything on the head gaskets when installing ( anything ) #3 a head gasket will also almost all the time leak into the cylinders #4 i have a pump for radiator if you need to check AFTER YOU PUT IT BACK TOGETHER it will do no good now as it is already going to the pan --- my guess its the intake angles and or gaskes seal but you did not say if you knew the motor was a good one from the start -- jz
|