Thread: cam suggestion
View Single Post
Old 09-05-2006, 01:08 PM   #58
jrsfast84
 
jrsfast84's Avatar
 
Join Date: Jan 2005
Location: easton,pa
Posts: 535
iTrader: (1)
Quote:
Originally Posted by lethalrides2k3
hey im selling a motor to wayfast,i got him all the part numbers for everything,but i cant figure out which cam to have him get
motor specs are
350 4 bolt main .030 over
hyperectic flattop pistions .030 over 9.73-1 cr
bowtie raised port heads - fully ported 2.02/1.60 stainless manley valves,comp locks retianer springs,1.5 ratio rockers
port matched victor jr intake 2,500-8k range
holley 750 dp
110gph fp
with that intake hell have to spin that motor up pretty high
so i gave him a choice of these 3 cams
voodo 227/233@.050 489/504 int/ex LUN-60103LK 1,800 to 6,200 rpms
voodo 241/249 .525/546 int/ex lun-60105lk 2000-6,800 rpms
edelbrock 232/234 .488/.488 int/ex edl-5002
what ya think,come up with a better cam choice?
btw they are hydralic cams
Did you sell it to him yet, It seems like putting a good combo together when picking a cam is not hard to do if i would know the combo, like how much are the heads ported, were they flowed,plus when you pick a cam out you just can't throw it ac am in and expect it to work, are the spring rates ok, spring heights play a big factor, i'd like to help, if he wants a stock motor with a cam and intake,some compression, i could do that,if he's buying your motor i could help him, i think with the right cam, i don't see why it should go 12's or quicker, well let me know. JR1.
jrsfast84 is offline   Reply With Quote