Quote:
|
Originally Posted by WayFast84
actually any one that has a degree kit, ill give you some money if you can come over and show me how to degree it..
|
Question - y do u want to degree the cam its not a race motor ?? its an over the counter bought to fit your combo cam -- is it not -- if you have a cam card thats the paper that comes along with the cam or as of late the info is on the outside of the cam box --- post the info in a message .450 intake lift ect 220 @ .050 or advertised duration ??? valve opens @ 12* X closes @ 34* type of thing and some might have spring pressure @ 1.750 - is 90 lbs do you have this info if not you need a cam doctor type tools to compute it and some one who knows how ?? i have reading info but on Crane cams or comp cams site they have a real good explain on how to -- but if u cant get the dots on the gears right -- dont know if that is going to be of any help -- ( How 2 align the dots ) on the cam top gear dot on the bottom --- the crank gear ( the bottom one ) dot on the top use a 12 inch ruel and center of crank to center of cam the dots must be in that line and torque the cam bolts all 3 to 25 foot lbs and use blue lock tight ( not RED ) and put it back together --- jz