[camaroracer1992]

i had a gear drive installed when my motor was done. i recently swapped out cams and i am in the process of putting the motor back together and noticed something kind of weird. i aligned the dots up with the crank gear and the cam gear like you normally would (crank at 12 o clock position and the cam at 6 oclock position).
when i did this it appears that cylinder 6 is in the firing position and to get the number 1 cylinder in the firing position both dots on the gears are at 12 o clock.

i dont haev the install intructions for this nor can i find htem online anywhere. anyone haev any ideas?

thanks