NJFBOA - Home of New Jersey's Camaros and Firebirds - View Single Post

ar0ck · 01-09-2007, 08:10 PM

As long as they are straight going back on you shouldn't have a problem. When you flip the valve cover over, you'll see that there are those guides for the gasket, I added ALOT of gasket maker in there to fill up any gaps that would arrise, but since I did that I didn't have any more problems.

I have Comp Mag 1.55rr's with tall poly locks, and I have yet to have any problems with clearance on the stock valve covers.

01-09-2007, 08:10 PM	#23
ar0ck Resident Camera Guy Join Date: Aug 2004 Location: North Jersey Posts: 10,971 iTrader: (2) Social Networks:	As long as they are straight going back on you shouldn't have a problem. When you flip the valve cover over, you'll see that there are those guides for the gasket, I added ALOT of gasket maker in there to fill up any gaps that would arrise, but since I did that I didn't have any more problems. I have Comp Mag 1.55rr's with tall poly locks, and I have yet to have any problems with clearance on the stock valve covers. __________________ Last edited by ar0ck; 01-09-2007 at 08:10 PM.