NJFBOA - Home of New Jersey's Camaros and Firebirds - View Single Post - Anybody know of a good shop to get a rollcage done?

BMF · 02-21-2007, 07:13 PM

I'm very skeptical about a Pre-notched kit, is this something you own already?

I'd imagine the wolfe kit is probably an excellent peice, however i seriously doubt the notches would require no additional fitting.

You could speak with my boss about a price quote, i would expect it to be pretty reasonable considering.

If this was a kit already tacked up, with floor plates tacked in i would consider doing the finish welding in my shop. If that is a route you are interested in taking. With strickly finish welding i would charge $400.

02-21-2007, 07:13 PM	#12
BMF Join Date: Jan 2006 Location: Hamilton SQ Posts: 103 iTrader: (0)	I'm very skeptical about a Pre-notched kit, is this something you own already? I'd imagine the wolfe kit is probably an excellent peice, however i seriously doubt the notches would require no additional fitting. You could speak with my boss about a price quote, i would expect it to be pretty reasonable considering. If this was a kit already tacked up, with floor plates tacked in i would consider doing the finish welding in my shop. If that is a route you are interested in taking. With strickly finish welding i would charge $400. __________________ Brian's Camaro build up BSE Power 385" Best ET 1/4 11.15 @ 117.42 Best ET 1/8 7.01 @ 95.94 Best 60ft 1.46 Launch Picture Last edited by BMF; 02-21-2007 at 07:14 PM.