Quote:
Originally Posted by 95 red slp
is there a way to check the ignition coils? it is just the stock ignition... but the thing is i should probably mention it doesnt do it ALL the time.
|
Yes, there is. Next time there is a code thrown (your service engine soon light goes on), immediatly go get it scanned. If it says "cylinder x Misfire" clear the code and swap the coil pack that goes with the misfiring cylinder with one of coils that goes with one of the good cylinders. The next time it throws the misfire code go get it scanned and see if the misfire has moved to one of the cylinders attached to the coil pack being tested. Be sure to keep track of where you are putting your plug wires during this. If your coil packs are numbered you will be putting them out of order.