NJFBOA - Home of New Jersey's Camaros and Firebirds - View Single Post - need measurements for Motive 3.73 gears!!

Tru2Chevy · 03-20-2007, 12:34 PM

Not sure what you mean by measurements. If you mean what spacing to set them up with, you will have to check that yourself. Every rear is slightly different because no two rear end housings are exactly alike.

If you have never installed gears before I would advise you to either take them to a professional, or have someone with plenty of experience there to assist you.

If you don't get them setup just right, then you just ruined a brand new set of gears.

- Justin

::edit:: After viewing that other post you made (which was unnecessary thanks to this one), I have to ask - are these gears used?

If so, you need to get the measurements from the previous owner.

03-20-2007, 12:34 PM	#2
Tru2Chevy Co-Founder / Site Admin Join Date: Jul 2004 Location: Ewing, NJ Posts: 22,476 iTrader: (8) Social Networks:	Not sure what you mean by measurements. If you mean what spacing to set them up with, you will have to check that yourself. Every rear is slightly different because no two rear end housings are exactly alike. If you have never installed gears before I would advise you to either take them to a professional, or have someone with plenty of experience there to assist you. If you don't get them setup just right, then you just ruined a brand new set of gears. - Justin ::edit:: After viewing that other post you made (which was unnecessary thanks to this one), I have to ask - are these gears used? If so, you need to get the measurements from the previous owner. __________________ 1999 Camry - Beigemobile DD 2002 Suburban - Wife's DD 2004 Grand Cherokee - Not running / Project / Selling?