NJFBOA - Home of New Jersey's Camaros and Firebirds - View Single Post - panhard and lower control arm adjustment ??

hardline_42 · 04-29-2007, 12:34 PM

Adjustable LCA's and panhard bars are used to locate the rear both fore and aft and side to side on the vehicle. You usually only need it to make up for a change in vehicle height. You can use the adjustable LCA's together with an adj. torque arm to set pinion angle as well. If you plan to lower the car, you should also get LCA relocation brackets to keep the correct geometry.

04-29-2007, 12:34 PM	#3
hardline_42 Join Date: Dec 2005 Location: Mount Holly, NJ Posts: 242 iTrader: (1)	Adjustable LCA's and panhard bars are used to locate the rear both fore and aft and side to side on the vehicle. You usually only need it to make up for a change in vehicle height. You can use the adjustable LCA's together with an adj. torque arm to set pinion angle as well. If you plan to lower the car, you should also get LCA relocation brackets to keep the correct geometry. __________________ '81 Sport Coupe 229 V6 -Junked '93 Z28 LT1 - Parting out "Is that a rat? No, it's just a really fat mouse."