NJFBOA - Home of New Jersey's Camaros and Firebirds - View Single Post

Pampered-Z · 05-02-2007, 12:43 PM

Hardcore has a Lingenfelter 219 cam in the for sale section. Tht would be a real nice power cam for a 305. Running it with 1.5 rockets it will probably make more torque then the LT4 cam W/1.6 rockers and be in the RPM range that a TPI can support the air flow needs.

Your could also look at Edelbrock TPS headers, about $400 and are large enough to support the HP you'll be making and retain the emmission stuff which might be important when it comes time to sell it?

I'm not a cutout liken person, to me it's just a way to make noise. Buy a good catback and give the car a nice tone instead!

JB

05-02-2007, 12:43 PM	#12
Pampered-Z Sliderule / Moderator Join Date: Oct 2004 Location: Catawissa PA Posts: 2,294 iTrader: (1)	Hardcore has a Lingenfelter 219 cam in the for sale section. Tht would be a real nice power cam for a 305. Running it with 1.5 rockets it will probably make more torque then the LT4 cam W/1.6 rockers and be in the RPM range that a TPI can support the air flow needs. Your could also look at Edelbrock TPS headers, about $400 and are large enough to support the HP you'll be making and retain the emmission stuff which might be important when it comes time to sell it? I'm not a cutout liken person, to me it's just a way to make noise. Buy a good catback and give the car a nice tone instead! JB __________________ 93Z M6 Black: The 385 Lives! Supercharged, 3-core front mount intercooler, GTP heads, 3:73's, Street twin clutch, Jethot Longtubes, Mufflex 4" catback/spintech, S+W cage, Spohn Suspenion, Yada Yada Yada 1) Build it 2) Race it 3) Break it 4) Repeat!!!