Quote:
Originally Posted by hardline_42
Yeah I didn't have any info on pinning studs back when I wrote that but you're right. Pinning the studs is easy, you can get a kit with the roll pins and drill bit and just drill throught the stud boss and hammer the roll pin in. But that creates a great place for the studs to crack and it's still a weaker stud. I'm not sure if the link I posted above for the studs is still valid but they were 7/16" threads into the head vs. the stock 3/8".
|
arp sells them not only in different lenght to accom valve installed hights and or lash caps but both top sizes as well -- jz