|
No it isnt worth it if you end up running a breather set-up..
Unlike the LS-1 pcv that takes the pressure from the valve covers the LS-6 pcv and work by taking the pressure out through the valley cover in between the cylinder heads..
The difference between the LS-6 is the Valley cover has a black box/oil separator in the center which attempts to remove the pressure out without sucking oil.. But LS-6's do consume oil also
When you run that you end up plugging off both valve covers from the pcv system.
__________________
2002 Z/28 = Firemutt Racing 370 w/ Cam, Trick Flow heads, TPIS 90mm Intake & 90mm T.B., Vigilante 3600 t.c., Michael's Transmissions Built 4L60E.
QTP Headers, Mufflex Stainless Y-pipe, Pypes Performance Exhaust, Moser 12-bolt w/ 33 spline axles,Truetrac & 3:73's., Spohn.
Cartek Tuned...
|