|
ok, im back, please at leats try this, or at leats consider it, it took me alot of effort and determination to go out to my truck, lol. now ill do my best to type what my manual says....
"1. turn the ignition to run then to off. this will disarm the theft-deterrent system
2. remove the radio fuse. this fuse is located in the maing fuse box(it goes on to explain where it is in my truck but just find it in ur car)
3. turn the ignition from off to run three times quickly(within five seconds). The vehicle will respond by locking the doors, unlocking the drivers doors and releasing the tailgate or panel doors(my truck is a yukon, not sure what itll do for u). Your transmitter is now ready to match the vehicle.
4. Press and hold the LOCK and UNLOCK buttons on the first transmitter for 15 seconds. The vehicle wuill respond as in step 3.
5. Repeat Step 4 for the remaining transmitters.
6. When you have finished matching all of your transmitters, replace the RADIO fuse.
7. Check that all transmitters work by pressing their buttons.
If the transmittetrs dont work, or if you'd rather not match the transmitters yourselfm see your dealer"
thats all from my manual... hope it helps...my bed is now calling my name,...
|