Starter Issues (again)
Car was running and driving just fine this past Winter, when I tried to start it three weeks ago. The starter would spool up, but wouldn't engage the fly wheel. I removed the starter and took it to Autozone to test it - tested fine (according to their machine). They said the yoke extended like it was supposed to.
I checked the flywheel - no teeth broken, no unusual wear. After I hooked the starter back up, I now get nothing. The starter doesn't even spool now. The wiring appears correct - I put it all back together the way it was. I haven't checked to see if any juice is reaching the starter though.
Assuming I fix the wiring problem, has anyone had a similiar problem with the starter - having it spin without contacting the flywheel? The only driving I've done has been under 30mph in a storage facility, so the flywheel couldn't have been affected.
Does anyone have an extra starter lying around I can borrow to test out some theories? An LT1 starter would be ideal since its a lot lighter.
__________________
I USED TO HAVE an 85 Camaro 305 4bbl, 90 Firebird V6, 97 Firebird V6 (10 speakers!). Despite the two family vehicles, 3 kids, wife and mortgage, I can finally realize the dream - 88 TA almost all stock... for now.
http://www.cardomain.com/id/untameddave
Wanted this -  , but ended up with this -  for free. Can't argue with free.
Last edited by Untamed; 06-24-2007 at 08:15 PM.
|