NJFBOA - Home of New Jersey's Camaros and Firebirds - View Single Post

JSPERFORMANCE · 07-08-2007, 08:50 PM

is it back together?

AND

I never said that you had to replace the ring and pinion, just that if the pinion bearings were shot bad enough, they could allow the pinion gear to move around and cause a bad wear pattern. Then you would have to replace the gearset to fix it and that would call for new bearings again. So I was just giving you a heads up with information based on my personal experience..

Just because they have decent bearings does not mean the whole kit is good..

07-08-2007, 08:50 PM	#6
JSPERFORMANCE NJFBOA Supporting Sponsor Join Date: Feb 2006 Location: HULMEVILLE, PA Posts: 2,023 iTrader: (4) Social Networks:	is it back together? AND I never said that you had to replace the ring and pinion, just that if the pinion bearings were shot bad enough, they could allow the pinion gear to move around and cause a bad wear pattern. Then you would have to replace the gearset to fix it and that would call for new bearings again. So I was just giving you a heads up with information based on my personal experience.. Just because they have decent bearings does not mean the whole kit is good.. __________________ JSSPEEDANDCUSTOM.COM Last edited by JSPERFORMANCE; 07-08-2007 at 08:56 PM.