NJFBOA - Home of New Jersey's Camaros and Firebirds - View Single Post

Batman · 08-07-2007, 04:13 PM

Ummmm why can't you bleed them? . I've bled mine a few times and have TCS and ABS. Only thing you may need is a Tech II if you have problems with the ABS or a low pedal and that just resets the ABS system. What year is your car? The 4th Gen's with TCS have a strange order you have to bleed the brakes in. If you go in the wrong order it is going to F' everything up and you'll never get a pedal. It is right rear, left front, left rear, right front for . I used a pressure bleeder and followed the Shop manual and it worked just fine. I wouldn't use a Haynes manual to prop up my coffee table.

08-07-2007, 04:13 PM	#2
Batman 11 Second Club Join Date: Jan 2005 Location: Fishkill, NY Posts: 1,278 iTrader: (1)	Ummmm why can't you bleed them? . I've bled mine a few times and have TCS and ABS. Only thing you may need is a Tech II if you have problems with the ABS or a low pedal and that just resets the ABS system. What year is your car? The 4th Gen's with TCS have a strange order you have to bleed the brakes in. If you go in the wrong order it is going to F' everything up and you'll never get a pedal. It is right rear, left front, left rear, right front for . I used a pressure bleeder and followed the Shop manual and it worked just fine. I wouldn't use a Haynes manual to prop up my coffee table. __________________ -Nick 9/11/01- Never Forget 2002 Pontiac Trans-Am WS6 # 206 Chasing 10's 469RWH/437RWTQ 11.05 @ 123 Last edited by Batman; 08-07-2007 at 04:24 PM.